CAT 14M Motor Grader

[pigeonfarmboy]

So badass! Here's an idea I've been thinking of. Using a helicopter gyro to automatically level the blade no matter the angle of the ground/tires? One less thing to operate on that beast!

[Espeefan]

Even the dashboard looks amazing! Wow. Nice job on plumbing up the hydraulic lines! If I could pick a build of the year, this would be it!

[mpe]

I really like how fluid your 14m controls are when she comes to life and the footprints in the sand are pretty cool also. You nailed it... Very nicely done!

-MPE

[crawler07]

crazy good work their Sir! I will own a mill and lathe one day and with enough practice I hope to pull off a build 1/16 as cool as yours!

[rockNmayhem]

Grader looks great with the steering working. Sound unit in it also sounds very good and clear. Now all we need is some sand or dirt along with paint and you will have one very amazing project.

Tyler

[CustomClod]

Just looked through the wholr build and this thing is amazing! Your skill is off the charts very nice work! Ill be watching this build for sure.
Scott

[johnboyee]

Just awesome, looks like its almost ready for the gps setup! Lol, are you going to add rippers to it at anytime? Looks like you don't have to worry to much about the front end being pushed out by the all wheel drivin rear! Great job!!

[Hemi1966]

I had to get a new radio gear to get all the function work, so I went and bought this Graupner 12 channel radio. Those 12 channel will just be enough, but I can´t add any more functions like the ripper. I still have to add two more switches and the I can operate everything. Those self centering switches are quite handy to operate the hydraulic valves.

http://i327.photobucket.com/albums/k471/Hemi1966/Cat%2014M/IMG_3960.jpg

[Hemi1966]

I began to tear down the grader for painting, here´s some parts that are ready for primer :)

http://i327.photobucket.com/albums/k471/Hemi1966/Cat%2014M/IMG_3989.jpg

[Hemi1966]

Not much to report here, I´ve been slowly painting some parts.
I have never liked painting:mad:, but now I bought a small spray booth which makes it a little easier.:)

http://i327.photobucket.com/albums/k471/Hemi1966/Cat%2014M/IMG_4009.jpg

http://i327.photobucket.com/albums/k471/Hemi1966/Cat%2014M/IMG_4040.jpg

[SmallHaul]

Nice job! What an incredible machine you have made.

It must be a blast to operate.

[rcguyfarms]

Oh man u ruined the unique look of the model. I would left it raw with some decals.

[JensR]

That's going to look ace!

Can't wait to see the first shots in the dirt that look like the full-size machine!

[Azonic]

This will be outstanding when assambled! Keep painting! :)

[Hemi1966]

Some progress:)

http://i327.photobucket.com/albums/k471/Hemi1966/Cat%2014M/IMG_4084.jpg

http://i327.photobucket.com/albums/k471/Hemi1966/Cat%2014M/IMG_4079.jpg

[D8R]

Looks good, very nice panels with all those holes!
Dan

[Azonic]

Looks pretty as ****, we need more! :)

[doodlebug]

Some progress:)

http://i327.photobucket.com/albums/k471/Hemi1966/Cat%2014M/IMG_4084.jpg

http://i327.photobucket.com/albums/k471/Hemi1966/Cat%2014M/IMG_4079.jpg

:D:D:D:D:D "Killer'', Look's super!
Cheer's, Neil.

[Stefan]

Excellent work, nice decals!
Stefan

[Lil Giants]

Moving right along Ari :cool:.. I thought the completed grader looked great without paint, but now with paint it will be enjoyable watching the paint disappear. :D

[B-Train Hauler]

Just see the seat and cabin... :eek: This build is litterally modelism at an art level !!! Can't wait next pics :cool:

[ihbuilder]

Looks great Ari . a true insparation for me to go into further detail on my loader :eek:

[Hemi1966]

Thanks guys:)

Forget to put the pictures of the cabin interior, but here they are:

http://i327.photobucket.com/albums/k471/Hemi1966/Cat%2014M/IMG_4131.jpg

http://i327.photobucket.com/albums/k471/Hemi1966/Cat%2014M/IMG_4130.jpg

[Snochaser]

:eek::eek::eek::eek::eek::eek: Absolutely amazing! I look and read in amazement just shaking my head. :D

Ben

[Ultrashort]

How did you do the paint job of the seat ? It looks really realistic !

Amazing model !

BR Ultrashort

[johnboyee]

That is jus amazing, Caterpillar should pay you for making their machine look so good! I was serious about a set of plans for this thing!

[Hemi1966]

How did you do the paint job of the seat ? It looks really realistic !

Amazing model !

BR Ultrashort

I kept a screen close to the seat, and spray the black color trough it creating those dots:)

http://i327.photobucket.com/albums/k471/Hemi1966/Cat%2014M/IMG_4137.jpg

[Espeefan]

Wow! I've seen guys use fishnet stockings to paint fuel tanks for motorcyles. It gives the paint job a neat snake like scale look, but using screen or mesh to paint the seat is even better! Very cool. I might have to remember that, and try it in something.

[rustybucket]

I hope you don't try to tell us that you jus' knocked this up over a couple of weekends :rolleyes: Seriously - some very nice craftsmanship. Graders are not my thing really but I shall certainly watch the progress of this model. To me engineering is one of the most pure forms of art and you ain't a bad artist ;)

[gear jammer]

I'm goin with everybody else that's awesome it looks great I'm ready to see some paint on it and running

[rc_farmer]

I need to find a thesaurus so i can find some more descriptive words for this CAT!!!:D

[jtroyer06]

Hemi1966

What type of tool did you use to make the details on the cab and hood? Also where did get all your micro fasteners from? Keep up the amazing work!

Thanks JT

[Hemi1966]

Hemi1966

What type of tool did you use to make the details on the cab and hood? Also where did get all your micro fasteners from? Keep up the amazing work!

Thanks JT

All the grooves and panel lines are milled with this tool :http://www.cut-tools.de/cnc8fold-tool-p-3817.html

Small nuts and screws are from here :http://www.knupfershop.de/shop/index.php?cp_sid=2383185566fa1&cp_tpl=main

[Hemi1966]

Have you guys ever tinted your windows on these machines, what is the best way to do it. I would like to get the grader windows little darker shade.

[trucker n]

hey ari they make spray tint for cars use that on some plastic:D

[JensR]

Tamiya has translucent paint for exactly that purpose.
It tends to be darker once mounted than when spraying, so do not overdo it :)

[modelman]

This is a great build-your attention to detail is amazing, but the sound system is what puts it over the top for me. It's perfect!!!

[Hemi1966]

Thanks guys for the information of the window tint:)

Here is a few shots of the progress:

http://i327.photobucket.com/albums/k471/Hemi1966/Cat%2014M/IMG_4145.jpg

http://i327.photobucket.com/albums/k471/Hemi1966/Cat%2014M/IMG_4149.jpg

http://i327.photobucket.com/albums/k471/Hemi1966/Cat%2014M/IMG_4152.jpg

http://i327.photobucket.com/albums/k471/Hemi1966/Cat%2014M/IMG_4169.jpg

[D8R]

See you like details to, Ari. The small stickers add realism!
Is everything manufactored now? Only painting and assembly left?
Dan

[9W Monighan]

Outstanding in every way! I've watched your videos a few times too. Your making this grader to a new standard that others can look up to. I can't wait to see some video of it in real dirt conditions with close ups.

[Espeefan]

It's really coming to life with the paint! I know raw models are really neat to look at too, but nothing says 'real' like a metal painted model.

[Vanisle]

Not sure if I have commented yet but, wow, the level of detail is amazing. I agree that the paint really does bring it to life.

[fuchs301]

it is a very amazing model and I really admire the details.
- How did you make or get the decals / sticker ?
- what kid of CNC-machines you have available ?

[Hemi1966]

it is a very amazing model and I really admire the details.
- How did you make or get the decals / sticker ?
- what kid of CNC-machines you have available ?

The Cat decals are printed on this: http://www.bare-metal.com/Experts-Choice-Decal-Film.html
The warning stickers are from Fechtner-Modelibau: http://www.fechtner-modellbau.de/

I have Optimum BF20L milling machine, that I have converted to CNC.

[Hemi1966]

I made few more details to the drawbar/circle by adding wear strip covers.
This is one of the last parts that is not painted, so it looks like the painting will hopefully end soon...

http://i327.photobucket.com/albums/k471/Hemi1966/Cat%2014M/IMG_4200.jpg

http://i327.photobucket.com/albums/k471/Hemi1966/Cat%2014M/IMG_4202.jpg

http://i327.photobucket.com/albums/k471/Hemi1966/Cat%2014M/IMG_4203.jpg

[Espeefan]

Amazing. One of my favorite builds on the forum here!

[Fired up]

Can you give me the place you got this pump from and a price that they go for.

[Hemi1966]

Can you give me the place you got this pump from and a price that they go for.
Here it is:

http://www.der-getriebedoktor.de/shop2/artikeldetails.php?aid=2703&sprache=2

[Hemi1966]

I got the cab back together after painting, it only needs some windshield wipers:)

http://i327.photobucket.com/albums/k471/Hemi1966/Cat%2014M/IMG_4249.jpg

http://i327.photobucket.com/albums/k471/Hemi1966/Cat%2014M/IMG_4248.jpg

http://i327.photobucket.com/albums/k471/Hemi1966/Cat%2014M/IMG_4230.jpg

[Hemi1966]

It´s back on it´s wheels;)

http://i327.photobucket.com/albums/k471/Hemi1966/Cat%2014M/IMG_4265.jpg

http://i327.photobucket.com/albums/k471/Hemi1966/Cat%2014M/IMG_4263.jpg

[Hemi1966]

http://i327.photobucket.com/albums/k471/Hemi1966/Cat%2014M/IMG_4269.jpg

http://i327.photobucket.com/albums/k471/Hemi1966/Cat%2014M/IMG_4272.jpg

[Trucker Al]

OOOAHH, That sure is pretty and looks perfect. Nice job!!

Alan

[gipicarto]

One of the best never seen !!!!! :eek::eek::eek:

[MitzuRazing]

It looks amazing! :D

[Hemi1966]

It´s coming together :)

http://i327.photobucket.com/albums/k471/Hemi1966/Cat%2014M/IMG_4290.jpg

http://i327.photobucket.com/albums/k471/Hemi1966/Cat%2014M/IMG_4289.jpg

http://i327.photobucket.com/albums/k471/Hemi1966/Cat%2014M/IMG_4281.jpg

http://i327.photobucket.com/albums/k471/Hemi1966/Cat%2014M/IMG_4277.jpg

[Azonic]

Omg! Mighty impressive, stunning build!

[footprint]

I was kind of upset you were painting it but WOW its coming together very nicely indeed, Job well done.

[Snochaser]

I would forgo the ScaleArt Loader to buy to something like this (not that it's for sale). As I have said before, this is a Fantastic build, superb skill and craftsmanship! Simply amazing!! Look forward to the videos and completion photos.

Ben

[Hemi1966]

Ok guys, that´s pretty much it:), all though still missing electronics and some minor details.

http://i327.photobucket.com/albums/k471/Hemi1966/Cat%2014M/IMG_4306.jpg

http://i327.photobucket.com/albums/k471/Hemi1966/Cat%2014M/IMG_4325.jpg

http://i327.photobucket.com/albums/k471/Hemi1966/Cat%2014M/IMG_4320.jpg

http://i327.photobucket.com/albums/k471/Hemi1966/Cat%2014M/IMG_4316.jpg

http://i327.photobucket.com/albums/k471/Hemi1966/Cat%2014M/IMG_4309.jpg

http://i327.photobucket.com/albums/k471/Hemi1966/Cat%2014M/IMG_4312.jpg

[steamer]

Ari. I don't know what else to say, except this is got to be one of the best construction models that I have ever seen. The detail is exceptional and the model runs superb. You should be very proud.
Rob

[RCLogger]

OMG ! That is a piece of art work !

What is the finished weight ? Looking forward to seeing some video's

greg

[gipicarto]

:eek::eek::eek::eek::eek::eek::eek:

[chaseracer]

this is amazing.. I cant find the words to say how awesome this grader build is... just wow

[fuchs301]

wow, what a great work.

-Do you want to add a rear ripper? I am not sure about the right english word, or is it a scarifier?

-how did you paint the grader, with a sprayer?

[egronvold]

Congratulations on an impressive build! It really came together nicely.

[straightpipejakebrake]

This is an incredible build! I love the interior details great job. The warning decals really give it that realistic touch!

[Snochaser]

I sit here shaking my head with the talent and detail of your machine.:eek:

I'll take without the electronics even.:D

Ben

[Lil Giants]

That turned out pretty good Ari. :cool:

Now to see it work! :)

Esc on the pump and mix all the valves (8 or 9 valves?).. what radio will you be using to control it?

[Vanisle]

Wow, seeing how that turned out makes me want to be a better machinist. It is very inspiring to see what can be done.

[Hemi1966]

Thanks guys for the nice words:o

RCLogger, the total weight with all the electronics on the scale is 9,8 kilograms.

fuchs301, no ripper at the moment. It´s painted with spray cans and airbrush.

Lil Giants, there is 8 valves, plus few speed controllers, sound, some lights...
For this I purchase new Graupner MC 22 radio.

[modelman]

Looking better with each picture!! This is truly a great model. Can't wait to see it "in the dirt". Great job

[kerst]

it looks beautiful! But in a way it is a shame it's finished. I really enjoyed following this project.
So, what is next?

Kerst

[Valdosetti]

It`s very nice model, fantastic job and the way you have donne is inspiring. Hope see video soon.

[Espeefan]

That is one fine looking model. I think it put the 'scale' in scale model. It couldn't have turned out nicer. It looks great just sitting there. It doesn't even have to be in the dirt to look good! I think it would look equally well in the dirt, as it would as a trailer load!

[Stefan]

Awesome !!!!

It's really inspiring to see what you have achieved and certainly raises the rib for my own efforts (in particular in terms of bringing the build to an end :o:o). Now, think I have to get down to the workshop right away... :D:D:D

[9W Monighan]

Very nice to see done. I'll miss seeing your updates like the others have commented. Just to get a feel for the overall size of this grader, can you take a picture with you holding the model or standing next to it?

Soooo... What do you have in store for us to watch on your next build?

[rockNmayhem]

What a beautiful work of art. That big guy came out amazing. I can't believe that the machine is rc as it looks so realistic in the last few pics. I can't wait to see the vids of it.

Tyler

[D8R]

Most impressive build! Hope to see it in person some day.
Those grader builds seems to be top notch nowdays. Will be looking forward to see more models coming from your workshop!

Dan

[Lil Giants]

Soooo... What do you have in store for us to watch on your next build?

Screw that!!! He's got a lot of videos to make dulling the shine on that paint! No more building till next winter, get to work shifting dirt! :D

[TRUCKMAKER]

Job well done! This is one of the finest scale models I've ever seen of anything, let alone one of my favorite pieces of construction equipment!:eek::eek::D:D

[heavy_duty]

Simply AWESOME.This guy is incredible.This is the build of the YEAR.

Ed

[JensR]

Fantastic! Congratulations :)

[Hemi1966]

Thanks again guys for your nice words.
I haven´t got any in action videos done yet cause the weather has been poor and the spring took few steps back.
I added some lights to the grader while waiting the weather to warm up:)

I´ve also been thinking what to build next, and my next project might be a Cat 374D L excavator;)


http://i327.photobucket.com/albums/k471/Hemi1966/Cat%2014M/IMG_4382.jpg

http://i327.photobucket.com/albums/k471/Hemi1966/Cat%2014M/IMG_4379.jpg

[Hemi1966]

Few outdoor shots:)

http://i327.photobucket.com/albums/k471/Hemi1966/Cat%2014M/IMG_4456.jpg

http://i327.photobucket.com/albums/k471/Hemi1966/Cat%2014M/IMG_4454.jpg

http://i327.photobucket.com/albums/k471/Hemi1966/Cat%2014M/IMG_4452.jpg

http://i327.photobucket.com/albums/k471/Hemi1966/Cat%2014M/IMG_4462.jpg

[Stefan]

:confused: Still clean??? :D:D

[9W Monighan]

Very nice. With the right background I would have a hard time telling it from a 1:1 machine.
Yes I agree with Stefan, Need some wear on the mold board but it does look great all painted up.;) I have a friend that restored a 1948 Cat 212 grader and it took about 4yrs before it saw dirt on the blade and I was the one who got to try it out and wear some paint off.:p

[RCTech9]

Nice pictures! The blade should be shiny (silver) by now!

[Trucker Al]

Hemi,

Great photos. Looks like the real thing to me.

Alan

[picapiedra]

Hemi1966.
I think a spectacular job and I would like someday to achieve this level of acavados in my models.
An affectionate greeting from Malaga, Spain.

[Lil Giants]

Must've had some good weather by now to make a few ten minute vids..

.. show us how it performs already! Or send it to me & I'll make it dance! :p :D

[dabears]

That grader is top notch! I thought the last set of pics were of a real one! Wow

[Hemi1966]

Finally got the grader out in the dirt, I'm uploading the video right now.
Here's a few teaser shot of it. Thanks for your patience:D

http://i327.photobucket.com/albums/k471/Hemi1966/Cat%2014M/IMG_0034.jpg

http://i327.photobucket.com/albums/k471/Hemi1966/Cat%2014M/IMG_0023.jpg

[Hemi1966]

Here's the first video, stay tuned more to come;)

http://www.youtube.com/watch?v=TBJu4fxwwto&feature=youtu.be

[elliot330]

looks good and you made it look easy to drive as well..

[Snochaser]

Awesome. Perfection! Great job, thanks for the video.

[egronvold]

Ut seems to work just as good as it looks! It's truly an amazing build :)

[doodlebug]

Another Homerun:D:D:D Look's like the weight and balance are perfect!
Thank's for sharing the video.

Cheer's, Neil.

[Hemi1966]

Thanks guys:)
Here's a video with onboard camera (GoPro Hero 2). Sorry for the shaky picture, my camera mount was a bit sloppy. Hope you don't get sea sick:o

http://www.youtube.com/watch?v=mqqthJq3QeQ&feature=youtu.be

[Hemi1966]

More of the same :o
http://www.youtube.com/watch?v=E_WD2PnwdM0&list=UULDovXkaIXRmeGnpeXpTHZw&index=1&feature=plcp

[Azonic]

What an awesome model you have built, respect!

How about a stick control video? :)

[Tamiya Cowboy]

TRULY AWESOME!!

[fhhhstix]

This is truly an amazing build with a lot of detail and time put into it. With that being said now I have to be "that guy". Why with all of the detail that went into it why did you stop at the wheel fasteners and just use plain old lock nuts?

Travis

[Hemi1966]

This is truly an amazing build with a lot of detail and time put into it. With that being said now I have to be "that guy". Why with all of the detail that went into it why did you stop at the wheel fasteners and just use plain old lock nuts?

Travis
My plan was to make covers for the wheel hubs, but totally forget it:mad:
So it's back to the machine shop;)

[fhhhstix]

My plan was to make covers for the wheel hubs, but totally forget it:mad:
So it's back to the machine shop;)

I know what you talking about it is always one more thing.

Travis

[rc_farmer]

Absolutely a superb job!

[FlyingBeagle]

That is incredible. Thank you so much for sharing. Please keep the videos coming.

[Actros861]

Incredible machine you have built there :)

[modelman]

The model seems to work as well as it looks!! I like the last video the best. That's just me personally,but you can see the whole machine and the work it is doing. I really like when it has a full blade with the sand rolling off the blade. Looks like a real machine. Great job!!

[FlyingBeagle]

I would love to see a video where you show the full range of motion of all of the machine. I know you built a lot of the real functions into it. for instance does the blade shift side to side, do the front wheels tilt, does the cab and boom pivot for tighter steering etc...


Thanks, Again your machine is incredible.

[9W Monighan]

WOW that works very well! Can you roll the blade forward some? That would work better for maintaining sand and gravel and the material won't collect on your blade.
Next test get it in some damp clay with the blade back like in the video and lean the wheels to keep the front end from sliding sideways.
Great job!!!!

[Madda]

So you are using Bf 20?

Are you pleased with it? Did you buy only the factory electronics or you also bought ballscrews?

Did you make hydraulic parts with it too?

[Hemi1966]

So you are using Bf 20?

Are you pleased with it? Did you buy only the factory electronics or you also bought ballscrews?

Did you make hydraulic parts with it too?

I'm quite pleased with it, only sometimes I have hoped it to be a little bigger. I have ballscrews in all axis.
I only made the cylinders for the grader and there was some milling on them that I did with the BF20.

[Lil Giants]

Looks like you practiced a bit before sharing.. :p ..pretty smooooth!

Need more video :)

[Construction]

I want your G-Codes. ;)

Truly amazing! I enjoyed following this project. Good job :D

[Espeefan]

Great videos. It's very nice to see the model in action, after all the hard work that went into building it to such a realistic level of detail!

[Daddy Mack]

I guess I'm jumpin onto this pretty late ha..?

I've just spent hours reading through this build... what an absolute masterpiece...

I operate a 140M all day 6 days a week, and still love it... and had an idea of building an r/c one myself... I started to search around a bit and found this... after seing the quality and perfection you have acheived I've been left confused...

How can I get a flight to your house... quietly slip out the back gate, and get back home to Australia with that model before you notice..? I don't ever see myself being able to produce something like that...

which begs the question... if you have all the data required to cnc the components, would reproducing a kit ever be a reality..? or even a half kit, with the fundamentals, ie mainframe components and blade, less hydraulics and radio etc. I understand there must be hundreds of hours of hand work also... but I really want one just like yours...

wow... still blown away... that thing is the single best r/c model I have ever seen...

thanks for sharing... Luke...

[DADSGARAGE]

This is an OUTSTANDING model!!! WOW !!! Well done !!!

[scottwear262]

This is awesome and Where did you find the blue prints ts at?

[Fired up]

one thing that amazes me besides how good these models look is how realistic they work love it

[ederson]

muito bom

[ederson]

gostei

[Optimusprime]

Awesome machine!!! :D

[denn1s33]

Over Power work great engineering.

[Everton]

Wow ! Professional work !

[Northern Farmer]

I could stare at this beautiful model all day long :eek: Fantastic job I love it!

[grimms3]

Over Power work great engineering.

Anyone know where one could be purchased?

[grimms3]

Time, time, time, and more time. I have CNC stuff but having a hard time finding the time.


Great work. What's your CAD? / CAM?

(Tormach 770 and 15L).

[Lil Giants]

Anyone know where one could be purchased?

It's a one off scratchbuilt by the OP, so no.

But there's a different one listed right now in the Buy and Sell, not far from where you live. ;)

http://www.rctruckandconstruction.com/showthread.php?t=12332

[rc_farmer]

Did you sell this fine model? I saw someone on YT claiming it to be theirs.

[Hemi1966]

Did you sell this fine model? I saw someone on YT claiming it to be theirs.

I sold it several years ago. Do you have a link for that video ?

[rc_farmer]

Oh, ok.....No, if i come across it again, i will fwd it to ya.

[CAT PUSHER]

This is outstanding build and craftsmanship , I'm new to this hobby but have spent many long hours in the seat of many CAT graders , first one was 120 last one was 14H , I'm 71yrs old and can tell you you handle that blade like your in the seat and the model is just outstanding.

[skeeter]

I as well would like to see that vid

[modelman]

You can see 3-videos put up by the builder "hemi" by going to YouTube and type in "scale r/c 14M grader". and they will come up.

[skeeter]

Thank-you sir for the info h0w to find it. That thing is AWESOME!

[modelman]

Your welcome skeeter-sometimes I spend hours on YT just looking at construction models and full size equipment. It amazes me what all is on there.

[Turan5561]

Hello!congratulations you did something so beautiful. can i learn how much you sell please.I wanted to learn the price of a greyder.

[rc_farmer]

Here is the link to your grader:

https://www.youtube.com/watch?v=JXv3mHHMcJw

[Hemi1966]

Hi guys,
I recently started to build a new grader, this time the 14M3 model. There's not that much changes on the outside besides the front of the frame arc, and the longer engine compartment.

But my question is, should I start a new build thread for this one, or have you guys seen enough of 14M builds for now.

I can't use any of my old drawings and CAM programs as I'm using Fusion 360 now, and it can't open those. So basically every part must be designed and drawn again. Also I'm planning to use 3D printer (which I still do not own) on some parts.

Here's couple of teasers for you:

http://i327.photobucket.com/albums/k471/Hemi1966/CAT%2014M3/Front%20axle_zpsncadwn2f.jpg (http://s327.photobucket.com/user/Hemi1966/media/CAT%2014M3/Front%20axle_zpsncadwn2f.jpg.html)

http://i327.photobucket.com/albums/k471/Hemi1966/CAT%2014M3/IMG_5123_zpst1lvri23.jpg (http://s327.photobucket.com/user/Hemi1966/media/CAT%2014M3/IMG_5123_zpst1lvri23.jpg.html)

[TRUCKMAKER]

Absolutely start a new build thread! Always great to watch your talent, especially since your using a slightly different technology! :popcorn:

[liftmys10]

Sweet!! Looks great with the fusion rendering.

[Cooper]

I agree!! show us another one :) I don't know where I found it but you should be able to import almost any cad file into fusion, or on some add-ins may have a file translator. may need some tweaking but,,, then again I don't know what im talking about 3/4 of the time,,,, but things always are better the second time around !!

[Jerome Bishop]

Really nice mate

[Hemi1966]

Since no one is against a new thread, I better start one :)

[mohanish]

I need Plans