Day cab dump truck

[fhhhstix]

I am building another day cab cab over dump truck but this one will just be a tandem drive and the shortest cab I could make. When I am done with this one it will be for sale.

Specs

1: Converted Globe Liner

2: 3 speed trans with Integy 4:1

3: Tazer 12T ESC and a 55 turn motor (stock motor is used only for mock up)

4: 2 1600Mah batteries in parallel for good run time

5: Hitec 645MG servos for steering and shift

6: Custom front rims with Tamiya SS, stock rear rims and tires with RC4WD hubs

7: Bushings through out only bearings are in the 4:1 NO bearings used in the rest of the truck. They are just not needed in our trucks + if a bushing gets worn you still get to play but if a bearing fails you are done to you replace it and most just buy the cheap $20-$30 bearing kits which are a wast of money anyway.

8: RCE220 RC Small Dual Relay Switch to control the screw drive motor

9: Carson 50:1 gear motor to operate the screw drive

10: My own custom screw drive

11: Styrene bed

12: color will be ?????

Well here are the pics of what I have so far.

http://i574.photobucket.com/albums/ss185/brokenb4/day%20cab%20dump/100_0993.jpg

http://i574.photobucket.com/albums/ss185/brokenb4/day%20cab%20dump/100_0994.jpg

http://i574.photobucket.com/albums/ss185/brokenb4/day%20cab%20dump/100_0995.jpg

http://i574.photobucket.com/albums/ss185/brokenb4/day%20cab%20dump/100_0997.jpg

http://i574.photobucket.com/albums/ss185/brokenb4/day%20cab%20dump/100_0999.jpg

http://i574.photobucket.com/albums/ss185/brokenb4/day%20cab%20dump/100_0998.jpg

http://i574.photobucket.com/albums/ss185/brokenb4/day%20cab%20dump/100_1001.jpg

http://i574.photobucket.com/albums/ss185/brokenb4/day%20cab%20dump/100_1007.jpg

http://i574.photobucket.com/albums/ss185/brokenb4/day%20cab%20dump/100_1006.jpg

http://i574.photobucket.com/albums/ss185/brokenb4/day%20cab%20dump/100_1003.jpg

http://i574.photobucket.com/albums/ss185/brokenb4/day%20cab%20dump/100_1004.jpg

Thanks for looking.
Travis

[spudd]

Don't have spudd paint it!!!!!
Youay never see it again

[fhhhstix]

Don't have spudd paint it!!!!!
Youay never see it again

No s#*t I hear you have to drive a stake beside him just to see if he is moving.:D

Travis

[FreddyGearDrive]

Get'em Biddle! Lookin real good so far!
FGD

[DieselKid]

Great start! I'm sold on the combo of using stock drive rims and rc4wd hubs! Looks awesome!:)

-Alex

[Tamiya Cowboy]

Looks great Travy you know how I like the cracker box dump trucks your killing me! :D

[fhhhstix]

Small update I have the screw drive done.

http://i574.photobucket.com/albums/ss185/brokenb4/day%20cab%20dump/100_1009.jpg

http://i574.photobucket.com/albums/ss185/brokenb4/day%20cab%20dump/100_1008.jpg

Travis

[Snochaser]

Looks good, a little different design on the screw drive? I can't believe you're not done yet.

[Stylin n profilin]

Your a building machine Travy....Becareful.. you might get some germs from pigeonfarmboy on that one like mine did..:p:p:p:D:D:D

[fhhhstix]

Looks good, a little different design on the screw drive? I can't believe you're not done yet.

Thanks Ben the screw drive is the same design just better quality (eye appeal) parts now that I have some tooling for the mill. I spent better than 7 hrs making the screw drive today and had most of the parts cut to length yesterday. A lot of that was spent at the mill and I had a great time doing it, with the right tooling.

Your a building machine Travy....Becareful.. you might get some germs from pigeonfarmboy on that one like mine did..:p:p:p:D:D:D

I guess I wont be upset if it doesn't sell this one is coming out better than my first one but I hope it does.:D

Travis

[td9clyde]

looks great your way to fast at buildin trucks it's like over night and whaaaaammmmm there it is keep up the awsome work

[DuelTruckDriver]

Looking freakin sweet Travis.:) Are you gonna do any more styrene work to the cab? Either way it looks bada$$:cool: >Marty<

[FabOne]

Look'in AWSOME Travis! DieselKid told me to check it out and I'm glad I did! ****, If I hadn't checked it out tonight, you would've had it done a sold!!!

-Terry

[fhhhstix]

Thanks for the compliment guys. I think the cab has had enough mod for me and I hope to start painting the truck this weekend.

Travis

[Straywolf]

The dumper looks great Travis i cant wait to see more:D Hmm if you stuck on a paint scheme maybe something like this?

Mike

http://www.hankstruckpictures.com/pix/trucks/andy_bruchey/2005/nov19/coe-dump.jpg


or this?

http://www.imcdb.org/i040306.jpg

or even this?

http://2.bp.blogspot.com/_h2HFSk-YN8U/SULubD3hdRI/AAAAAAAAAkY/s8JVd_BXWj0/S730/BOCOE.jpg

[fhhhstix]

Thanks Straywolf I appreciate the ideas.


I have made a little more progress on this build. I now have the tailgate, splash pan, and rear bumper to finish then it will be ready for filler and paint. I have most of the electronics in the truck and hooked up I just need the ESC for the screw drive and the main power switch. I did something a little different this time and added a main power switch and a charging jack so the batteries can stay in the truck and charging it is a simple plug and play. Enough talk here are some pics.

http://i574.photobucket.com/albums/ss185/brokenb4/day%20cab%20dump/100_1019.jpg

http://i574.photobucket.com/albums/ss185/brokenb4/day%20cab%20dump/100_1022.jpg

http://i574.photobucket.com/albums/ss185/brokenb4/day%20cab%20dump/100_1024.jpg

Travis

[Tamiya Cowboy]

LOOKING GOOD! Great looking little truck Travy! Box looks great any luck on that plastic..

[fhhhstix]

Thanks Paul I have the plastic, now I just have to send it. I will see about getting a box this week so I can get it packed up.

Travis

[td9clyde]

very slick hmmmmm could this be a lil brother to the blue truck?

[Brian in PA]

Looks great Travis! What did you do for the front wheels?

Brian

[fhhhstix]

Looks great Travis! What did you do for the front wheels?

Brian

Brian I just copied what Rod had done on his green day cab tri axle. Take the out side bead off a rear rim and glue it to the front rim after I take the front rim and smooth out the edge and remove the chrome.

Travis

[Bsorenson79]

Looks great Travis! What did you do for the front wheels?

Brian
You took the words right out of my mouth. I see these wide rims all the time and wonder how they are made.

[DuelTruckDriver]

Its looking really sweet Travis:) Thats really cool idea, doing the front wheel like that.:cool: >Marty<

[Juganought]

I did something a little different this time and added a main power switch and a charging jack so the batteries can stay in the truck and charging it is a simple plug and play. Enough talk here are some pics.

Travis can you please show how this is done? or the stuff you used? I have been wanting to do this for a while.. but aint got a clue :cool:

[cabrover]

Looking great Travis, cant wait to see this one done!!!

Tim

[crawler07]

Great looking truck man! Is the charging jack in the front bumper? Is the port something you buy or build? I have never seen tis done before/well with the exception of a charging jack on a remote, but on a truck its a new one for me..How does the speed control for the dupm wire in? I will be building a dump trailer for my dodge, but I cant wrap my head around how the wiring will go??

[fhhhstix]

Looking great Travis, cant wait to see this one done!!!

Tim

Thanks Tim I have some ideas for modding the cab into something a little different so it might be a bit before I have another update.

Great looking truck man! Is the charging jack in the front bumper? Is the port something you buy or build? I have never seen tis done before/well with the exception of a charging jack on a remote, but on a truck its a new one for me..How does the speed control for the dupm wire in? I will be building a dump trailer for my dodge, but I cant wrap my head around how the wiring will go??

The charging port is a Deans connector wired into the off side of the power switch so it is just like plugging the charger into battery but you don't have to remove the battery to charge it. The ESC for the dump is wired in parallel with the drive ESC so it gets shut off with the power switch as well. The ESC for the dump is from The Robot Market Place (Click here to see the ESC) (http://www.robotmarketplace.com/products/0-TD-RCE220.html) and it has solder spots for limit switches to limit up and down travel and is perfect for the screw drives. For a dump trailer I like to build tool boxes under the bed for the ESC and battery so the trailer is self contained and only needs a servo lead to the trailer to control the dump allowing it to be controlled by multiple trucks easily.

Thanks to all for looking and the comments.
Travis

[fhhhstix]

Well I finally got busy today and painted the truck so now I have to let it dry and I can assemble it and it will be done.

http://i574.photobucket.com/albums/ss185/brokenb4/day%20cab%20dump/100_1358.jpg

http://i574.photobucket.com/albums/ss185/brokenb4/day%20cab%20dump/100_1361.jpg

http://i574.photobucket.com/albums/ss185/brokenb4/day%20cab%20dump/100_1360.jpg

http://i574.photobucket.com/albums/ss185/brokenb4/day%20cab%20dump/100_1359.jpg

http://i574.photobucket.com/albums/ss185/brokenb4/day%20cab%20dump/100_1357.jpg

Thanks for looking.
Travis

[spudd]

Lookin good corky!!!

[fhhhstix]

Lookin good corky!!!

Thanks father time.:p:D

Travis

[Izzy]

Wow that is a nice blue!

[fhhhstix]

Wow that is a nice blue!

Thanks Izzy I got the paint from one of our members here and he picked out a great color. Here are a couple pics of the cab and body sitting on the chassis. I have some wet sanding and polishing to do but it should look real good.

http://i574.photobucket.com/albums/ss185/brokenb4/day%20cab%20dump/100_1366.jpg

http://i574.photobucket.com/albums/ss185/brokenb4/day%20cab%20dump/100_1367.jpg

Thanks for looking.
Travis

[Snochaser]

Well look at you. The first paint job in what looks to be your new paint booth.

Ben

[fhhhstix]

Well look at you. The first paint job in what looks to be your new paint booth.

Ben

Thanks Ben it must have been the day for painting.;):D

Travis

[fhhhstix]

Well the truck is done for the most part all I have left is cutting the side boards. The paint turned out decent, it is not perfect by any standards but I think it will be fine for a dump truck.

http://i574.photobucket.com/albums/ss185/brokenb4/day%20cab%20dump/100_1371.jpg

http://i574.photobucket.com/albums/ss185/brokenb4/day%20cab%20dump/100_1369.jpg

http://i574.photobucket.com/albums/ss185/brokenb4/day%20cab%20dump/100_1372.jpg

http://i574.photobucket.com/albums/ss185/brokenb4/day%20cab%20dump/100_1373.jpg

Thanks for looking.
Travis

[MACK Daddy]

Nicely Done !


Alfy

[glorydays24]

Travis, don't cut yourself short on the paint job. FANTASTIC!!! Great job my friend.:D:D:D:D

[Izzy]

That's a nice combo right there. The cab over day cab is my least favorite style - but you make them look right at home with a dump. Much better turn radius than a long nose as well. And I agree that paint job turned out good - heck a little time in a sand box and she'll look great!

Great job Travis!

[Bsorenson79]

The truck looks great! Very clean looking!

[spudd]

Looks dang good Corky!!!! I'm impressed
Love the color

[fhhhstix]

Nicely Done !


Alfy

Travis, don't cut yourself short on the paint job. FANTASTIC!!! Great job my friend.:D:D:D:D

That's a nice combo right there. The cab over day cab is my least favorite style - but you make them look right at home with a dump. Much better turn radius than a long nose as well. And I agree that paint job turned out good - heck a little time in a sand box and she'll look great!

Great job Travis!

The truck looks great! Very clean looking!

Thanks guys the compliments they are appreciated. I hope to get the side board cut and the truck listed for sale by the weekend.

Travis

[Stepside]

:cool::cool:Shiney! :cool::cool:

Lookin good :D

[fhhhstix]

Looks dang good Corky!!!! I'm impressed
Love the color

Thanks uncle tater and I hope you like the color.:rolleyes:

:cool::cool:Shiney! :cool::cool:

Lookin good :D

Thanks Rod I have been putting off painting it for long enough and decided it was time to get it done.

Travis

[Brian in PA]

Looks Great! Its about time:D:D:p:p

[Ruffazz Express]

Thats cool Travis love the colour you did a great job mate :):):):)

[plow jockey]

Nice build.I really like the color!

[crawler07]

Looks great in blue! Now if only we had a video.....

[fhhhstix]

Looks Great! Its about time:D:D:p:p

Thats cool Travis love the colour you did a great job mate :):):):)

Nice build.I really like the color!

Looks great in blue! Now if only we had a video.....

Thanks Guys, I like the blue myself. No video I will leave that for the future owner.

Travis