extended trucks

[6wheelking]

anyone know the part that goes between two drive axles and where to get one from I extended my truck and the one long drive shaft im using is to long

[SuperDutyScaler]

on real trucks its called a carrier bearing/ support. i milled one out of aluminum and bolted it in. i used axial and traxxis plastic driveshafts expoxied together to make a longer driveshaft. ill post a few pictures for you tomorrow

[Brel]

have a look on here to see if the have a prop shaft in the length you want
http://store.rc4wd.com/Punisher-Shaft_c_27.html

[6wheelking]

on real trucks its called a carrier bearing/ support. i milled one out of aluminum and bolted it in. i used axial and traxxis plastic driveshafts expoxied together to make a longer driveshaft. ill post a few pictures for you tomorrow

im talking about rc trucks I think I found one but its a kit and i just want the center part

have a look on here to see if the have a prop shaft in the length you want
http://store.rc4wd.com/Punisher-Shaft_c_27.html

They dont have one or maybe I just didnt see it, picture below of the part im speaking of

[Dreamweaver]

Here is a link to a how to that Tamiya Cowboy did on making drive shafts.

http://www.rctruckandconstruction.com/showthread.php?t=708


I also made mine like this. I am not home right now or I would give you part numbers for the parts needed, perhaps if you send TC a PM he will get ya the part numbers.

Here is a pic of mine... The carrier bearing is made by Meir or Mier.. I got them on ebay but just looked and can not find any, don't know if anyone can help.

http://i587.photobucket.com/albums/ss316/MJDreamweaver/Classy%20Shak/444.jpg

If you want to keep the truck some what realistic then you drive lines can not be more than 4.5 inches long.

Here is my inter-axle. Again I have the part numbers at home for these but TC can get them for ya faster.

http://i587.photobucket.com/albums/ss316/MJDreamweaver/Classy%20Shak/440.jpg

http://i587.photobucket.com/albums/ss316/MJDreamweaver/Classy%20Shak/408.jpg

[6wheelking]

Thanks DREAM and I found one of TC threads, and found a website that sells the carrier bearings and thanks for the link and info on the shafts cause my shaft now is about 18'' but that one will be scraped

[gun]

Thanks DREAM and I found one of TC threads, and found a website that sells the carrier bearings and thanks for the link and info on the shafts cause my shaft now is about 18'' but that one will be scraped

Could you please post a link to the site where to buy the carrier bearing !

[6wheelking]

not sure exactly how to do this hope link works...... http://store.hkshobby.com/index.php?manufacturers_id=66&osCsid=64bcb8296216f98b85aeda0482e5cd95 ........if not look for thread...... RC Mier cant find them?? ..thats where I found the link. They are 8.99

[Dreamweaver]

Glad I could help, and thank you for the link..

I believe that if you look in TC's thread I made a post that has the part number for the tube if ya need that. It will be 1/2" aluminum tube ya need.

[6wheelking]

I got that link just gotta pick up some shafts from the HS