help needed

[dmess62]

I've got a motor issue. When pulling my trailer with my King Hauler(55t motor and 9 tooth pinion) when it gets into a little strain going up slight incline the motor starts cutting out. This is in 1st gear. Any suggestions as to the problem. I never noticed it with no trailer

[dabears]

Mine kinda does the same thing,I just give it more throttle. I have the same set up 55 turn and a 9 tooth gear. With 50#of load I really have to throttle up on an incline. (my daughter sits on the trailer)

[rc_farmer]

Are U guys running any other GRU, if not or even if so, try chaning that 9t out to a 6t, U will a lot better pulling power in fisrt gear.

[dabears]

how much more mods are needed for a 6tooth? the 9 tooth needed a spacer between the motor and trans, but i may need to re adjust mine as i get a geary noise in first gear.. idk

[dmess62]

Mine kinda does the same thing,I just give it more throttle. I have the same set up 55 turn and a 9 tooth gear. With 50#of load I really have to throttle up on an incline. (my daughter sits on the trailer)

that is with the throttle all the way up also. Its like the motor is turnining off and on. do you have any pic of how u spaced the motor with the 9 tooth. i didnt pu any thing in mine

[dmess62]

Are U guys running any other GRU, if not or even if so, try chaning that 9t out to a 6t, U will a lot better pulling power in fisrt gear.

no gru. i put in the 9 tooth because I hadn't had time to order a 6 tooth