Bruder Liebherr L574

[toniolillo]

Then tonight I'll show the conversion

[toniolillo]

This is the conversion of a bruder liebherr l574 with hidraulic:
http://img197.imageshack.us/img197/7014/dsc05280ru.jpg (http://imageshack.us/photo/my-images/197/dsc05280ru.jpg/)

[toniolillo]

after disassembling the machine start with two servos modify 18 kg for traction wheel of the machinehttp://img195.imageshack.us/img195/7033/20121118121218.jpg (http://imageshack.us/photo/my-images/195/20121118121218.jpg/)
http://img11.imageshack.us/img11/5004/20121118121252.jpg (http://imageshack.us/photo/my-images/11/20121118121252.jpg/)
you have to remove all the electronics and leave only the engine as well as remove caps to rotate 360 degrees
http://img51.imageshack.us/img51/6084/20121117122554.jpg (http://imageshack.us/photo/my-images/51/20121117122554.jpg/)
Here you can see the servo also used for the direction of the machine, I had to make a few pieces of aluminum to hold down the plastic besides the machine to fit the servos
http://img856.imageshack.us/img856/1999/20121116133044.jpg (http://imageshack.us/photo/my-images/856/20121116133044.jpg/)
http://img818.imageshack.us/img818/3651/20121118112247.jpg (http://imageshack.us/photo/my-images/818/20121118112247.jpg/)
for rear axle servo have to cut a chunk, so that it fits well and can swing the shaft
http://img600.imageshack.us/img600/3720/20121118131312.jpg (http://imageshack.us/photo/my-images/600/20121118131312.jpg/)
I have plastic lined to keep the putty from sticking to the servo
http://img442.imageshack.us/img442/2416/20121204095930.jpg (http://imageshack.us/photo/my-images/442/20121204095930.jpg/)
I bought a hydraulic kit for this machine with a 10 bar pump, a delivery hose and necessary as well as the hydraulic fluid tank, put more progress tomorrow

[lee.means]

where did u get the hydraulic kit from

[toniolillo]

Hi, from this page: http://www.magomhrc.com/es/
continued with the transformation
http://img689.imageshack.us/img689/8385/20121204122716.jpg (http://imageshack.us/photo/my-images/689/20121204122716.jpg/)
Here is presented the piston that lifts the bucket, And the three pistons placed:
http://img153.imageshack.us/img153/4536/20121206123307.jpg (http://imageshack.us/photo/my-images/153/20121206123307.jpg/)
http://img835.imageshack.us/img835/6260/20121210121405.jpg (http://imageshack.us/photo/my-images/835/20121210121405.jpg/)
here and I have mounted the pipe for hydraulic fluid
http://img705.imageshack.us/img705/3885/20121211224829.jpg (http://imageshack.us/photo/my-images/705/20121211224829.jpg/)
http://img546.imageshack.us/img546/493/20121211224956.jpg (http://imageshack.us/photo/my-images/546/20121211224956.jpg/)
And that's all for now

[toniolillo]

http://img541.imageshack.us/img541/4581/20121211224848.jpg (http://imageshack.us/photo/my-images/541/20121211224848.jpg/)
continue with the transformation, I've placed the rest of the electronics, along with the deliverer and the tank valve, I've also the driver's seat upholstery, painted the details and we've made a fire extinguisher
http://img607.imageshack.us/img607/6460/20121206123141.jpg (http://imageshack.us/photo/my-images/607/20121206123141.jpg/)
http://img855.imageshack.us/img855/4995/20121208190913.jpg (http://imageshack.us/photo/my-images/855/20121208190913.jpg/)
http://img40.imageshack.us/img40/8797/20121210123717.jpg (http://imageshack.us/photo/my-images/40/20121210123717.jpg/)
http://img577.imageshack.us/img577/2236/20121210123752.jpg (http://imageshack.us/photo/my-images/577/20121210123752.jpg/)
I put a home video
http://www.youtube.com/watch?v=3Tm9dp9AuC8
I have not much use yet, but hey I need practice gradually

[louie r/c nut]

Cool vid That's one sweet rig wanna build me one .

[RCP57]

Me too!

[ngward79]

You guys may want to check this site . They have a lot of conversion parts for Bruder products.
http://www.rcteknikk.no/product_info.php?products_id=400

Hydraulic kit
http://i1225.photobucket.com/albums/ee381/ngward79/Mobile%20Uploads/Hyd_kit_CAT320c_zps4512a5fc.png (http://s1225.photobucket.com/user/ngward79/media/Mobile%20Uploads/Hyd_kit_CAT320c_zps4512a5fc.png.html)

Metal parts
http://i1225.photobucket.com/albums/ee381/ngward79/Mobile%20Uploads/Alu_armer_574_1_zps7a3c3bf4.jpg (http://s1225.photobucket.com/user/ngward79/media/Mobile%20Uploads/Alu_armer_574_1_zps7a3c3bf4.jpg.html)

http://i1225.photobucket.com/albums/ee381/ngward79/Mobile%20Uploads/aluschaufel_frontansicht_zps81b586d0.jpg (http://s1225.photobucket.com/user/ngward79/media/Mobile%20Uploads/aluschaufel_frontansicht_zps81b586d0.jpg.html)

Planetary axles
http://i1225.photobucket.com/albums/ee381/ngward79/Mobile%20Uploads/starrachse_1_zps471c46a2.jpg (http://s1225.photobucket.com/user/ngward79/media/Mobile%20Uploads/starrachse_1_zps471c46a2.jpg.html)

They also sell almost ready to run Bruder dozers , track loader and excavators too .

[toniolillo]

Great contribution my friend, i will look later on this page some interesting pieces for my Liebherr

[toniolillo]

page in Spanish that I discuss the prices are cheaper than in the other, the only thing there pieces such as the bucket or arms of the machine

[cosworth34677]

hey how did you glue the shaft to the servo outlet?

[ngward79]

Found this just the other day if anyone is interested. Think I may have to build one of these soon.
http://www.afv-model.com/4711shop/product_info.php?products_id=3580

[Ashrod]

What are you using to control the hydraulic valve??? I think I might order one of the kits for my loader!!! I assume you are using 2 servos to do it, but I am not sure on size and how you connected them to the valves!!! Thanks

[cosworth34677]

its the mangon hrc kit very ggod stuff and good price, they use three small sub micro servo's like the little 9g servos or the hi tec hs-55

[Ashrod]

Do you have to buy them separate and install them on the valve body yourself???

[cosworth34677]

you have to buy them separate. but if you buy them from there site they will putt them in for you .

[Ashrod]

Cool, thanks a bunch for the info!!!