Thread
:
ScaleART - Assembling a MAN TGX/XL 6x6 tractor & Trailer
View Single Post
#
61
12-23-2015, 10:25 PM
Rakthi
Apprentice
Join Date: Apr 2014
Location: Back in Belgium
Posts: 476
Re: ScaleART - Assembling a MAN TGX/XL 6x6 tractor & Trailer
The heavy duty front coupling
Support bar for the push/pull rods gets bolted on.
The push/pull rods that will attach to the chassis
The bits in the upper left corner are not used here. They are to attach the coupling to the frame of other models.
The M2x20 bolts get installed throught the previously drilled holes and the spacers put on.
Bumper ready to be attached to the frame
Bumper attached and screw needs be bolted through the black grill and chassis. This screw serves to hold the spring to lock the front of the cabin and also prevents the unlikely event of the bumper being pulled of the frame.
Screw bolted on and spring installed. Arrow indicates where the push/pull rod from the heavy duty coupling will attach.
__________________
Cheers, Stephan (Rakthi is the one in the avatar)
Rakthi
View Public Profile
Find all posts by Rakthi