Need some bolt help.

[Claus]

I'm wanting to replace the machine screws on the frame work of my Wedico with cap screws (bolt heads). I need 2mm diameter, at least 6mm long and stainless steel. Every time I go to McMaster-Carr I get more confused and I don't want to buy bolts I have no use for.

http://www.mcmaster.com/#

Can anybody point me in the right direction please?

[Brian in PA]

Craig I went through it, and it seems that the hex head aren't available in metric sizes.

Brian

[Ken Orme]

I looked at McMaster and I did not see any machine screws that small.

I checked "Micro Fasteners" They have the size you are looking for BUT they have a socket head (requires an allen wrench)

A 2mm is .0787 dia. A standard US #2 is .086 dia. If you want to be adventitious you might be able to tap the holes with a #2 tap. I have seen a lot of #2 x 1/4 long brass hex heads in hobby shops.

You might look across the pond for the metric sizes.

Ken

[9W Monighan]

Look here----
http://www.microfasteners.com/catalo...cts/MSCHBS.cfm

Or Here
http://www.scalehardware.com/threaded-hex-bolts-c-1

See if you can figure out this site. This is the place I found .040'' rivets for my dragline in qty at a fairly reasonable price.
http://www.chronos.ltd.uk/acatalog/S...___Screws.html

[Smokin Joe]

I use http://www.rbmotion.com for small hardware.

[spudd]

I get mine from micro fasteners

[Claus]

Well poop, guess I just paint the screws to match the frame. Sure thought it would have been easier than that.

[Car5858]

Try these Claus
http://www.microfasteners.com/catalo...ts/METSCMS.cfm
part # SCMS2006

[androiduk]

Just done a search via my search engine .

http://www.boltmeup.com/m2-x-8-stain...20-11201-p.asp

Can tell you nothing more sorry.

[Claus]

Thanks guys!