Screw drive setup/layout

[fhhhstix]

This is the best I can do.

Here is a list of the stuff you will need to build a screw drive and some pics.

First get some rails from Lowe's it is actually 1/2in cap for ply wood.
Next get some delrin to make the slide
Next get a piece of 10-32 all thread and a 10-32 furniture nut and a thrust bearing it is the blue piece at the end of the screw drive by the nut.
Click here for the link to the thrust bearing
next get at least a 50:1 gear motor and a coupler to hook the gear motor to the threaded rod.. I use an all thread nut and drill it for two set screws.















I hope this helps.
Travis