Manufacture Hydraulic Pump?

[ihbuilder]

OK , now I know the slang for it , sickle gear is nothing more then a vain . most furnace pumps are vain pumps as far as I know . I got my seal for mine ,just did not get it installed yet . I've been busy with wheel orders and a job that finally came up . I have no doubt about flow rate , just skeptical on pressure . My dad has suggested a furnace pump also ,I just did not get there yet . I have a couple

IHSteve

[ihbuilder]

Originally Posted by ihbuilder

OK , now I know the slang for it , sickle gear is nothing more then a vain . most furnace pumps are vain pumps as far as I know . I got my seal for mine ,just did not get it installed yet . I've been busy with wheel orders and a job that finally came up . I have no doubt about flow rate , just skeptical on pressure . My dad has suggested a furnace pump also ,I just did not get there yet . I have a couple

IHSteve

I stand corrected , a sickle gear set is just what the jung pump has . I finally got to take a furnace pump apart and ohlala just what I've been looking for and the right size to . now to make the right size housing for it ,HMMMMMM come to think of it , I think the newer furnace pumps are about the right size . oh more research

Originally Posted by Bellien

If you are still considering building a pump, have you considered using the sickle gear set out of a furnace oil pump?

thank you so much for bringing this up made me check it out sooner then later

IHSteve

[trucker n]

what is a furnace pump

[ihbuilder]

Originally Posted by trucker n

what is a furnace pump

oil furnace to heat your house , unless you live where it's a constant 90 deg all year round .

[trucker n]

i have heat but dont use it much and it is gas so no pump where can i get one

[ihbuilder]

Originally Posted by trucker n

i have heat but dont use it much and it is gas so no pump where can i get one

Neil , the pump as it comes is to bulky to fit in a model . the way I figure , all that is worth out of the pump is the gear assembly . I'll be making a new housing to be able to fit in a construction model . I should be able to get it close to the jung pump size . but if you want ( beckett )

IHSteve

[Bellien]

Let me know how it goes, it would certainly be a cost saver if it was reasonable to re-build them..

[Stepside]

Originally Posted by Vanisle

UMs also sells pumps:

http://www.umstech.in/searchproduct....d_201010218555

Doesn't FGD have some in his projects?

Anyone know where to get these pumps???

[ihbuilder]

Originally Posted by Stepside

Anyone know where to get these pumps???

working on it

not sure on buying looks like UMS went into the commercial arena .

I should be able to stay close to their price range , NO LESS , depending on a good shaft seal price .

[22fatcat]

Hi, I have built two pumps, the first one was very loud and it moved to much oil not very efficient. the second one i used a much smaller gear and it seems to work pretty good but it has not been used on my excavator yet I just recently bought the spool valve from Rc4wd and need to finish the connections and make an overflow tank. Hopefully this one will work well.

[Stepside]

Originally Posted by ihbuilder

I should be able to stay close to their price range , NO LESS , depending on a good shaft seal price .

I emailed UMS, but doubt I'll hear anything back.

Any idea on when you could get a prototype built? There's a demand here and you're the guy to fill it!!!

I would rather my money stay in the US and what better than to support one of our own. Go get 'em Stevie!

[ihbuilder]

Originally Posted by Stepside

I emailed UMS, but doubt I'll hear anything back.

Any idea on when you could get a prototype built? There's a demand here and you're the guy to fill it!!!

I would rather my money stay in the US and what better than to support one of our own. Go get 'em Stevie!

as soon as motors and gear stock come in and someone has me tied up for this month

i'd say a month or 2 also you know what else is coming

[RCP57]

Originally Posted by ihbuilder

as soon as motors and gear stock come in and someone has me tied up for this month

i'd say a month or 2 also you know what else is coming

I'm out of the loop! What else is coming?

[ihbuilder]

Originally Posted by RCP57

I'm out of the loop! What else is coming?

well it comes after a valve and does some work

I'm waiting on mtrl quote so I can order mtrl . dang holiday's and weather messin things up hopefully better this week

[petermoblin]

This wouldn't be a multi-stage cylinder would it Steve

[ihbuilder]

Originally Posted by petermoblin

This wouldn't be a multi-stage cylinder would it Steve