Kenworth 850 Off Highway

[RCP57]

I spent a little time here and there over the last few days and managed to get the rear suspension done. The leaves need some prettying up but I will do that later on when I finish the axles. I made up my own link bars and TIG'd them together. I then pressed the pins and rubber bushings(hose) in. It seems to flex nicely but not an unrealistic amount. At least I was finally able to see it roll back and forth on it's axles! Now comes the tricky part...finishing the gear train!

Thanks for looking!

http://youtu.be/LS6eurJgOYY













Reg