Brushless Track Upgrade Kit

[Rimrock]

Each motor has 3 wires that will be going separately via the swivel all the way to the brushless regulator, one for each motor. So totally 6 wires through the swivel to the 2 regulators. Doesn't mater how these 3 wires are mixed, just change around 2 wires to get the motor running in opposite direction. Each regulator has a + & - wire, for the battery. Than the wires from the regulator to the receiver.
DON'T connect wrong +/- regulator cables on the to the battery => game over.

[stevec]

Thankyou Rimrock will get back if it works

[stevec]

well well work first time thank to you Rimrock top man thanks mate