|
|
|||||||
| Static Conversions This is the place for all your Bruder cab and trailer conversions. |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
03-14-2017, 07:06 AM
|
||||
|
||||
Re: VW bay-window transporter
 I pulled the transaxle out. Unscrew body from pan, unsnap rear seat tabs, unsnap engine cover tabs. rims pull straight off, 3 screws and the transaxle comes out. 3 screws and you can pull one side of the gearbox apart, pull out the flywheel. I used a mitsumi pancake motor out of a CD-rom drive. Some 0.040 styrene was laminated to the center beam for motor mount. Then the side plate that supported the flywheel was clearanced and reinstalled.  Needed to do some trimming and put some color on the dash details.
__________________
What do ya mean "Cars are neither Trucks or Construction"? It's still scale, and i play fairly well with others, most of the time... 
|
|
| Currently Active Users Viewing This Thread: 2 (0 members and 2 guests) | |
|
|
Hybrid Mode
