Classy Shak

[Dreamweaver]

Got the new frame rails on it again, and this is perfect I am real happy with the length now. Comes out to a 371" WB





As the video I posted yesterday shows, I got the steering hooked up, well all but the drag link.





The second u-joint under the dash.



I also got the shocks on and the fenders mounted.







And last but not least I got my inter-axle drive line in.



So that's it for now.

~Mike~

[Dreamweaver]

Well got one of the running boards completely finished tonight.

I started with making a piece to cover the fender mount and the gap between the fenders and the frame.



Then I just added the steps.








Now the fun part will be making the other side match.

~Mike~

[Dreamweaver]

Well after 5.5 months around 300-350 hrs. I am DONE with the styrene work.

Now all that is left is the body work, electronics, painting and chroming, and lots of details.






















~Mike~

[Dreamweaver]

Well not getting much done for now.

Waiting on some much needed parts.

I did get the rear drive shaft and one of the carrier bearings mounted.




~Mike~

[Dreamweaver]

Howdy Folks..

Well I received a much needed and awaited part from Lynn (tc1cat) yesterday, and man was it beautifully made and exactly what I wanted.

THANKS LYNN


I sent Lynn a picture I drew up of a back bumper I wanted to have built. With out thinking twice about it Lynn said he could make it.


















I could not wait for the 5mm led's for the bumper so I put some 3mm in temporarily to see how they work. I made up a simple circuit that would allow the same lights to be both tail and stop and turn.

Here's a short Youtube.

Youtube Video

~Mike~