|
Side dump,useing some first run shop parts
Awhile back,built a side dump trailer from scratch. Seems a few people really liked it. So figured maybe see if these can be made w/out costing a fortune. Took my first one into shop,made a few changes,& had them make up some parts for this baby.
Picked up the formed & lazered parts a few days ago & started to build another trailer. First the frame assembly. http://i301.photobucket.com/albums/n...mppics5352.jpg Should of had them make this plate for king pin,but wasn't sure if I was going to taper the frame the same as the last one. So had to make this one,it's some long long cuts w/a scroll saw. http://i301.photobucket.com/albums/n...mppics5353.jpg http://i301.photobucket.com/albums/n...mppics5355.jpg This one is a triple axle like the last,but this time gunna run floaters on the front axle.Not quit sure if I like the looks of it. http://i301.photobucket.com/albums/n...mppics5357.jpg http://i301.photobucket.com/albums/n...mppics5356.jpg Thanks for lookin! FGD |
Re: Side dump,useing first run shop parts
I agree with you on the looks of the front axle. I don't recall ever seeing a trailer with floats on the front axle. I have seen some with a lifting 3rd axle with floats. Either way this is still a sweet trailer. Are you still going to use hydros or linear actuators?
|
Re: Side dump,useing first run shop parts
I like what you are doing with my trailer but I dont like the float front axle needs to be a normal front axle not a single.
|
Re: Side dump,useing first run shop parts
I agree with Paul the third axle needs to be duals.
Travis |
Re: Side dump,useing first run shop parts
looks like your off to a get start with the new parts
|
Re: Side dump,useing first run shop parts
Freddy - nice use of sub plates for the legs, single and double suspensions......
|
Re: Side dump,useing first run shop parts
Well glad this is the only time I have to do all this parts making for a side dump.I think this is going to work wonderful!
Got the cylinder mount/hindge brackets made. http://i301.photobucket.com/albums/n...mppics5360.jpg http://i301.photobucket.com/albums/n...mppics5362.jpg http://i301.photobucket.com/albums/n...mppics5361.jpg http://i301.photobucket.com/albums/n...mppics5359.jpg http://i301.photobucket.com/albums/n...mppics5363.jpg http://i301.photobucket.com/albums/n...mppics5364.jpg http://i301.photobucket.com/albums/n...mppics5366.jpg http://i301.photobucket.com/albums/n...mppics5367.jpg Thanks Guys! & the super singles are back in the tire box. Thanks for lookin! FGD |
Re: Side dump,useing first run shop parts
Looking good as always Freddy!:D
|
Re: Side dump,useing first run shop parts
I've started saving FGD. Did you receive my mail? :)
|
Re: Side dump,useing first run shop parts
Awesome Freddy. Using a trunnion design on these? Kind of looks like it!
|
Re: Side dump,useing first run shop parts
Thanks Guys!
Yea Thomas I got the message,where's the call? Nate,you hit it right on the head! It's a little harder to build,But this is the way there all gunna be. This is going to work sweet,I can just feel it. Plus now I can switch side to side via the radio!:cool: http://i301.photobucket.com/albums/n...mppics5371.jpg http://i301.photobucket.com/albums/n...mppics5373.jpg http://i301.photobucket.com/albums/n...mppics5383.jpg http://i301.photobucket.com/albums/n...mppics5378.jpg http://i301.photobucket.com/albums/n...mppics5380.jpg http://i301.photobucket.com/albums/n...mppics5381.jpg http://i301.photobucket.com/albums/n...mppics5379.jpg Thanks for lookin! FGD |
Re: Side dump,useing some first run shop parts
Ohh yeah freddy you are right very nice set up with the Hydro's..Keep it coming I got a truck ready for it..
|
Re: Side dump,useing some first run shop parts
coming along great!
|
Re: Side dump,useing first run shop parts
Quote:
|
Re: Side dump,useing some first run shop parts
very sweet!!!
also in your picture http://i301.photobucket.com/albums/n...mppics5357.jpg I saw trailers like that on my way up to Edmonton, Alberta. At first i was like what the heck are they doing?? then now you say floaters i think i get it. I dont get is why a trailer from the deep south would be up here in the deep north with floaters lol. |
Re: Side dump,useing some first run shop parts
|
Re: Side dump,useing some first run shop parts
Thanks Guys!
Espeefan,If I mass make these,The train is a must!:D & looks like this is the system I'm going to keep! http://i301.photobucket.com/albums/n...mppics5389.jpg http://i301.photobucket.com/albums/n...mppics5388.jpg http://i301.photobucket.com/albums/n...mppics5386.jpg http://i301.photobucket.com/albums/n...mppics5385.jpg http://i301.photobucket.com/albums/n...mppics5384.jpg Now bolt the latches on it,OOOOH BABY!:D I can't wait to sit on my butt w/the radio,& flip the dump from side to side:D:D:D:D:cool: Thanks for lookin! FGD |
Re: Side dump,useing some first run shop parts
That is looking good there Freddy keep up the good work.
Travis |
Re: Side dump,useing some first run shop parts
Woah !! That Looks #$%^&*! Bas A$$
I Like it ! Alfy |
Re: Side dump,useing some first run shop parts
Looks like the material should slide right out. Good jod:D
|
Re: Side dump,useing some first run shop parts
Totally digging your trailer, Fred. Just awesome. With every picture I see you post, I want one worse and worse.
|
Re: Side dump,useing some first run shop parts
Really nice pops. How do you plan to disengage the pivot locks on each side by radio? Servo with rod?
|
Re: Side dump,useing some first run shop parts
Very nice set up there Freddy old boy.. Keep up the great work..
|
Re: Side dump,useing some first run shop parts
My dream of being able to sit on my butt,& dump an r/c sidedump trailer to either side.
Is almost a reality!:D http://i301.photobucket.com/albums/n...mppics5392.jpg Now..I have a warning to the lazy,old,side dump lovin,r/c type Guys,like myself. Do not watch these two vids without a paper towl close by.It really made me hawnee.:D http://i301.photobucket.com/albums/n...mppics5390.jpg http://i301.photobucket.com/albums/n...mppics5393.jpg I can't wait to hook the truck to this one!:D:D Thanks Guys,Nate does that answer your question? Thanks for lookin! FGD |
Re: Side dump,useing some first run shop parts
very nice
|
Re: Side dump,useing some first run shop parts
Dang Freddy.. I knew after all the talking on the phone and you saying you want to be able to do this I knew you would figure out a way..Great job any video yet..
|
Re: Side dump,useing some first run shop parts
Very cool! I wasn't the one who asked how you would remotely switch the side the tub dumps to, but I appreciate the video. That is some really nice machine and design work on your part. So when are you going to build for the 1/16 scale Wedico crowd?
|
Re: Side dump,useing some first run shop parts
Ain't no stoppin' you Freddy...salt throwers...PTO driven dump bodies...side dumper (both sides, thank you)...can't wait to see what's next!! (Maybe you'll finish one of 'em...ha ha). :p:D:D
|
Re: Side dump,useing some first run shop parts
Great job Freddy the latches look fantastic.
Travis |
Re: Side dump,useing some first run shop parts
Hey Freddy, Now the 1:1 crowd will be jealous:D
Later, Neil#2 aka doodlebug. |
Re: Side dump,useing some first run shop parts
lookin good fred...
|
Re: Side dump,useing some first run shop parts
It's pretty nice, but will it have the strength to hold the respective pivot in place? I was thinking more along the lines of a retracting hinge pin.
|
Re: Side dump,useing some first run shop parts
Thanks Guys!
Beans,the latches seem to work just ducky. Yo Spuddy! Here you go! Click on this pic! http://i301.photobucket.com/albums/n...mppics5522.jpg A little tweekin,a few pieces,some paint & she'll be dumpin dirt. Guys Thanks for lookin! FGD Ok Spudd,what do you think of me now?:p:p:D:D |
Re: Side dump,useing some first run shop parts
Nice Freddy. Now for some material in there. Slick me friend, slick!
Ben |
Re: Side dump,useing some first run shop parts
:cool::cool: keep it up and I will have to add a hyd unit. You guys make this seem so easy:rolleyes:
|
Re: Side dump,useing some first run shop parts
Cool Fred, that's a neat concept.
Brian |
Re: Side dump,useing some first run shop parts
Very nice, and creative as always
|
Re: Side dump,useing some first run shop parts
I'm impressed!!!!!!
Only took 8 months to get a video Let the bidding begin |
Re: Side dump,useing some first run shop parts
Fred that dump on both sides is just jaw dropping. I love it. Cant wait to see it with a full load though. Keep on goin.
|
Re: Side dump,useing some first run shop parts
Looking good as always Fred!:D
|
| All times are GMT -4. The time now is 09:54 AM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.