Thread: s&f + DOC for a .010 endmill
View Single Post
  #10  
Old 10-11-2011, 10:43 PM
pugs pugs is offline
Wannabe
  
Join Date: Sep 2010
Location: Central Wisconsin
Posts: 368
pugs is on a distinguished road
Default Re: s&f + DOC for a .010 endmill
I run 90deg single flute engravers with .005 tip to depth of .010" to .015" at 10k rpm and 15ipm feed, 30ipm plunge in 6061 if that helps at all
__________________
Jeff
Last edited by pugs; 10-11-2011 at 10:53 PM.
Reply With Quote