|
Big Boys of the road 4x4/6x6/8x8/10x10 Trucks This forum is for those multiple axle trucks and other vehicles on and off road. |
|
Thread Tools | Display Modes |
#8
|
||||
|
||||
Re: Capo 1582-2 Tatra T815-7 8x8 and Cross MC8 Man Kat 1 8x8
2-m2.5 screws fastening each cab hinge to the bumper. With only about 3 to 4 mm of thread actually holding the hinges on, i was concerned about them being strong enough. So i tapped them all the way through and used longer scale hardware.
This is what it looked like from the front prior to tapping New screws bolting on the hinges From the front After scale hardware added to the grill Started mocking up a fix for the front wheel scrub issue with the coil over Offset link ends added. This stops them from hitting the axle under compression, i just wish i could find some metal ones. Full lock and compression, and no binding! Tomorrow I'll replace the styrene with aluminum and make them look presentable. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|