Metso Lokotrack LT120, Jaw Crusher.

[Azonic]

Made a little more progress on the crusher. I got some parts for the feeder table, so welded that up and started to try out the motors I got for the feeder, it was kind of a shot in the dark becuse I had no idea how much power it would take and how much the table would weigh.
It turned out that the original weights on the motors were to small so I got some scrap brass and made the weights twice as big, that woke the vibration up pretty good.

So I think I found a nice vibration speed.

Also mounted the crusher to the chassis. Now im waitning on some parts before I can continiue on the conveyor and feeder.










Video.
https://youtu.be/xi7a81UN6yc