966 Snow Box Plow

[rc13]

Thanks Ken! I thickened up the back of the plow on the top and bottom, then tapped for a couple screws. But Loctite 435 sealed the seams and added more strength.

[rc13]

I thickened up the top and bottom of the plow with additional aluminum pieces to accommodate the screws and to make it look a little better.

[rc13]

Originally Posted by rc13

Thanks Ken! I thickened up the back of the plow on the top and bottom, then tapped for a couple screws. But Loctite 435 sealed the seams and added more strength.

By the way, there is an L brace on the back of each of the sides that are screwed together. And the angled square braces have also been tapped and screwed together. It took some time for me to get those angles and the tapping precise, but it worked out great and is super strong.