LilGiantsConstrCo

[Lil Giants]

T9, hundreds!

Patrick, I use a DX18 with the JD, it has rotary sliders on each side of the radio, left is steering & right is for/rev. The instructions are pretty easy to follow for mixing, master = valves, slave = pump, get your +/-'s in the right order & you're done. I'll use this radio for all previous & future hoes.
left up/dn = boom
left l/r = swing
rht up/dn = stick
rht l/r = bucket
3pos for pump - dn is off, middle is 30%, up is 90% (if I remember correctly)
2pos for coupler
2pos connected to esc for screener
...I'd have to add the X-Plus module to the rx for the other 9chs, if I wanted to add anything more.


No worries John, Fumotec will make you one too, get at 'er! Thank goodness I paid for mine last Sept, with the euro-cdn exchange today it'd 13% more!

I got 5 valves with this 490, so I might consider a thumb, but I've never had a use for one before. Fumotec figured some time this yr he'd come with some attachments, though he didn't say what exactly.