1/10 Liebherr Excavator R 984 Litronic

doodlebug · #1 02-08-2014, 07:27 PM

Great job on the final drives! Keep the pictures coming.
Cheer's, Neil.

Fired up · #2 02-08-2014, 08:02 PM

very nice

JAMMER · #3 02-09-2014, 10:05 AM

Hi did you cut all the internal and external gears in you drive? If you did you did a very nice job. Ed

Markus K. · #4 02-09-2014, 10:29 AM

Hi Ed,

just the internal gears are laser cut. In every drive is a stack of 10 sandpaper-cleaned pieces with a complete height of 20mm. Using thicker material is less/ poor quality. The internal gears were bought online. Sorry for the blurry picture, it shows one of the int. gears. The small brass gear was just for checking.

JAMMER · #5 02-09-2014, 11:29 AM

Hello so you laser cut the internal gears, I was thinking you cut then your self and was wondering how you did it. Your way is a lot easer than broaching them and also buying the other gears saves a lot of time but you still did a nice job. Ed

Markus K. · #6 02-09-2014, 11:33 AM

Ed, stay tuned! I'll come up with the turntable next. It has an internal gear, also, but bigger teeth and wasn't lasercut

JAMMER · #7 02-09-2014, 11:37 AM

OK I sure will be looking forward to that. Ed

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)