JBC limited NZ

[andyathome]

Cheers.
Never had a rc with sound before but now im hooked.
have ordered 2 sound units. 1 for king hauler and 1 for excavator.
loader driver has a long way to go before hes qualified much better in the excavator.
Guess I better change the battery again.

[andyathome]

got a bit of painting done, want to paint all the light holders and still waiting for front guards to turn up, also have a slight problem with the loader.
one of the rear wheels has come loose and my small nut driver has gone missing so I cant sort out my loose wheel.
I don't want to go to the local hobby shop just yet, It could end up costing a lot.( usually dose , all those shiney things)
cheers for now.
going to redo the decals on the arm as not correct and also theres a few to go on the motor housing .

ps the loader is only allowed inside if it sits on the newspaper LOL.

[Supermario]

I can't help but drool when I see this beauty. Now go get the tools you need and treat this loader right!

Mario

[liftmys10]

Originally Posted by andyathome

got a bit of painting done, want to paint all the light holders and still waiting for front guards to turn up, also have a slight problem with the loader.
one of the rear wheels has come loose and my small nut driver has gone missing so I cant sort out my loose wheel.
I don't want to go to the local hobby shop just yet, It could end up costing a lot.( usually dose , all those shiney things)
cheers for now.
going to redo the decals on the arm as not correct and also theres a few to go on the motor housing .

ps the loader is only allowed inside if it sits on the newspaper LOL.

Holy smoke! I thought the top photo was of the real one and I was about to comment and say nice job on making scale decals to match! ! That top photo looks so close to 1:1 and I looked at it several times. The only thing that gave it away was the red color transmission.

[andyathome]

cheers for the positive comments, Im trying to make this look right , it getting there, front light brackets in paint and a few more decals done, will have a few beers and look at it, not sure that Im happy yet but getting there, maybe it just needs a little more dirt on it.

[pumptech]

Hey Andy ,you sure have a awesome fleet ,keep up the great work !!

[andyathome]

just one more in the sunshine.

[andyathome]

all right time for some updates.

excavator:
ordered a sound card from eagle machinery ( same as my loader)
and crammed it into the excavator, am running it of the 4th valve so after my Y cable (signal reversing) turns up it should be all go.

have also made a few decals for the rock truck,

also had a slight problem with the loader.
had a rear wheel come loose from the axial, emailed tang at eagle machinery and got a detailed how to do , remove wheel, remove ring gear, pull axial, pull washer , look inside and find 4 small bolts holding planetary gear to axial housing tighten up and all good.


new drive motors for excavator have turned up so will fit those when I have a bit of time, also front fenders for loader here and painted.

also have eight more diggers, early one morning on my way to the shed for a bit of play time and I spot this.

[PaulNZ]

Originally Posted by andyathome

just one more in the sunshine.

I like this shot Andy

just the right distance and angle to make the Shed look the same scale

nice