JBC limited NZ

[andyathome]

that's the one Joe, found it by mistake.
good for practising the bucket swaps, I need some more reading time to see if I can do something with the slew as its quite jerky and smooth small movements are quite a pain.
I am wondering if a better esc and motor gear set up will fix the problem, or can it be slowed on the radio, by that I mean the acceleration of the motor.
the mix channel switch seems to only affect the hydraulics , only noticed it as my sound card is controlled by the forth valve( engine revs ) but dosent seem to have any effect on the rotation.
time to get the radio manual out.

cheers andy

[osikasculptor]

What I did was screw the dial all the way in on the pressure relief valve then
the dial for that servo can be used to manually adjust the overall pressure/function speed from the radio (mix always off then) This also keeps sound constant- dialed up down manually with pump on or off.