![]() |
#1081
|
|||
|
|||
![]()
wanted custom dump trailer .... thanks guys
|
#1082
|
||||
|
||||
![]()
http://www.rctruckandconstruction.co...play.php?f=106
This vendor can scratchbuild pretty much whatever you want, his name is Reg.
__________________
Sharing knowledge is one thing that defies basic arithmetic logic --- the more you share, the more you get! Joe |
#1083
|
||||
|
||||
![]()
Got cracking @9am this sunny morning, I tried to keep track the #loads in the 1st hour, but lost count...14 - 16? 4hrs later there's a big pile of dirt out there... ofcourse I didn't think to take a pic before I started this morning.
![]() Clouds are rolling in now, lunch break over, better get back 'er to get as much done before the waterworks start. ![]()
__________________
Sharing knowledge is one thing that defies basic arithmetic logic --- the more you share, the more you get! Joe |
#1084
|
||||
|
||||
![]()
Never thought looking at dirt would be so satisfying
![]() ![]()
__________________
Always wasting money, as the wife says. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#1085
|
||||
|
||||
![]()
After looking at dirt for 7hrs today, I'm kinda of sick of it Coop.
![]() ![]() Got rained out an hour ago... it's calling for snow overnight. ![]() ![]() ![]() Not sure if half the pile is gone already, but it'd be close. ![]() ![]() ![]()
__________________
Sharing knowledge is one thing that defies basic arithmetic logic --- the more you share, the more you get! Joe |
#1086
|
||||
|
||||
![]()
__________________
Sharing knowledge is one thing that defies basic arithmetic logic --- the more you share, the more you get! Joe |
#1087
|
|||
|
|||
![]()
I Love it, its so cool how you can go from inside the house to outside, and have fun doing so.
![]() |
#1088
|
||||
|
||||
![]()
its a good thing you have a tunnel project to do. could you imagine if you had these sized machines when you began the dig and how much more they would have moved.... Then again, they wouldn't have fit down there till now!
![]() I'm loving that new ADT ! |
#1089
|
||||
|
||||
![]()
Joe, congrats on the new B50, what a machine. That looks to be just the ticket for moving more material out...You sure got lucky on the overhead clearance, I guess overloading the box and mounding material over the sides will be taken care of on the way out?
![]()
__________________
Jason |
#1090
|
||||
|
||||
![]()
The drive out is getting a bit long Brian as the roadway is getting narrower all the time with bigger equipment, kinda makes for slow uneasy navigating not to rub the wall or fall off the edge... I'll get what loose dirt there is out of the way, then tear everything out & rebuild it with 1/2" sheet @ 24 inches wide... most of the roadway currently is only 16 inches with most of it 3/8 sheet & some is 1/4, which was fine for the Tamiya trks.
I wish I had this JD850 when I started Mario, I would have done zero hand digging! ![]() ![]() Thanx Jason, it's a mighty hauler alright. I knew the clearance was gonna be close, fortunately I didn't have to take a grinder to the B50 to make it fit. ![]()
__________________
Sharing knowledge is one thing that defies basic arithmetic logic --- the more you share, the more you get! Joe |
#1091
|
||||
|
||||
![]() Quote:
![]()
__________________
Jason |
#1092
|
||||
|
||||
![]()
Thursday morning there was still a few inches snow on the ground, but it warmed up fast to 15 before noon, such a bright warm sun that the pile was dry enough to work with the dozer by 5pm!
https://www.youtube.com/watch?v=jloTJ9Yr17U ![]() WOW what a great day yesterday, didn't last though. ![]() ![]()
__________________
Sharing knowledge is one thing that defies basic arithmetic logic --- the more you share, the more you get! Joe |
#1093
|
||||
|
||||
![]()
When are you going to start using the big D9?
__________________
RIP FGD 12-19-11 To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#1094
|
||||
|
||||
![]()
Don't know, no plans to use it anytime soon.
Well the snow forecasted for the wkend didn't happen, so I got more dirt hauled out Saturday nite & Sunday. ![]() Another roadway collapse on Sunday, this could've been much worse than it was. ![]() Zipped in a bunch of 1" screws, plus strung a guide line from the ceiling for added support. ![]() ![]() ![]() ![]()
__________________
Sharing knowledge is one thing that defies basic arithmetic logic --- the more you share, the more you get! Joe |
#1095
|
|||
|
|||
![]()
Oh man that's why the frost laws are on he in mi. Time for new roads cool pic I really like that dump truck
|
#1096
|
|||
|
|||
![]()
mate that was close , lucky save.
might need to look at roading upgrades with all that extra weight. |
#1097
|
||||
|
||||
![]()
Glad to see the new truck didn't suffer the same fate as on the last road failure
![]() Sad to say but another scale factor achieved! Starting to resemble the condition of Canada's roads and infrastructure. Under rated old roads but hauling max loads ! ![]() ![]() Not saying your worksite is in disarray Joe, just kinda reminds me of the roads here in Ontario right now. Lol Last edited by Supermario; 03-23-2015 at 06:22 PM. |
#1098
|
|||
|
|||
![]()
You got to get on those highway inspectors they not doing their darn job
|
#1099
|
||||
|
||||
![]()
soon your gonna need a road tax or haul permits to get money for road improvement lol
|
#1100
|
||||
|
||||
![]()
Guess this winter has been hard on them Canadian roads!!! Lol!!! You might have to build a on site concrete plant!!
__________________
Always wasting money, as the wife says. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
![]() |
Currently Active Users Viewing This Thread: 40 (0 members and 40 guests) | |
|
|