|
|
#881
09-24-2015, 07:38 PM
|
||||
|
||||
Re: Great Dane excavating co.
Quote:
 there would be no second chance needless to say.
|
|
#883
09-24-2015, 08:44 PM
|
||||
|
||||
|
Re: Great Dane excavating co.
Yes, but my wife weighs more than the dozer,,,,,,, uhhh the 1:14 scale honey
 you don't weigh as much as a d11!!!! Goes like this in that scenario , dog pees on dozer, dozer runs over dog, wife sees dog get run over, dozer gets run over by wife!! Husband needs new home to rebuild dozer!!! Lol!!!
__________________
Always wasting money, as the wife says. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
|
|
#884
09-24-2015, 08:46 PM
|
||||
|
||||
|
Re: Great Dane excavating co.
On the other hand at least it wasn't the big dog, (Great Dane). That would have been a torrential downpour!!!! Total flood reclamation project!!!
__________________
Always wasting money, as the wife says. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
|
|
#886
09-24-2015, 09:19 PM
|
||||
|
||||
Re: Great Dane excavating co.
 It's been a while since the zoo has had an appearance here!! All three "big" dogs!! The little shyt thinks he is a big dog, they are waiting for dinner , or my leg!?!
__________________
Always wasting money, as the wife says. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
|
|
#888
09-24-2015, 10:53 PM
|
|||
|
|||
|
Re: Great Dane excavating co.
reverse would have been a bad idea. LOL
we have two rotties and a british bull dog, lets just say the bigger the dog the bigger the brain. my wife may disagree due to the fact that the bull dog is hers but heres some examples. example 1: my rotties have never run into a closed ranch slider door... example 2: when leaping out of car my rotties have never landed on their face... cheers andy
|
|
#889
09-24-2015, 11:58 PM
|
||||
|
||||
|
Re: Great Dane excavating co.
Quote:
__________________
Always wasting money, as the wife says. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
|
|
#890
09-25-2015, 07:07 PM
|
||||
|
||||
|
Re: Great Dane excavating co.
Gonna have some weekend work to do so I figure I better eat healthy,
 This is the little river hostel,   Track I've been working on  And what every Riverlot needs , a good stocked toy box!! 
__________________
Always wasting money, as the wife says. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
|
|
#892
09-25-2015, 08:51 PM
|
||||
|
||||
|
Re: Great Dane excavating co.
Quote:
truck ride so opened the door on my k5 blazer and jumped right into the quarter panel head folded under his chest and flat out cold.
|
|
#893
09-27-2015, 01:31 PM
|
||||
|
||||
|
Re: Great Dane excavating co.
Quote:
__________________
Always wasting money, as the wife says. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
|
|
#894
09-27-2015, 01:34 PM
|
||||
|
||||
|
Re: Great Dane excavating co.
Almost done with another access road. Goes from top of lower bank to river. The pic doesn't look steep but the steps in foreground show steepness of bank. Lots of finger roots to bust, had to use the small hatchet on some.
__________________
Always wasting money, as the wife says. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
|
|
#895
09-27-2015, 01:38 PM
|
||||
|
||||
Re: Great Dane excavating co.
  And shortly after running excavator a pin broke in gear head on tracks. Was using excavator to chew through roots on bank then using dozer to push level road surface. The original drive system for the 4200 is a lot slower than the "upgrade" system but stronger in my opinion. Not worth the $300 if anyone interested.
__________________
Always wasting money, as the wife says. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
|
|
#897
09-27-2015, 02:32 PM
|
||||
|
||||
|
Re: Great Dane excavating co.
Lmao
|
|
#898
09-28-2015, 10:20 PM
|
||||
|
||||
|
Re: Great Dane excavating co.
Quote:
|
|
#899
10-02-2015, 05:08 PM
|
||||
|
||||
Re: Great Dane excavating co.
   Ok so tires were a limiting factor in what size haul truck can be made, and I am also limited if I can't figure out how to make telescopic cylinders. I'm making on out of brass first. Figure I can solder ends easier than brazing stainless. And brass is way easier to machine for me than stainless. If I can make these work I'm going to try and make the finished cylinders out of 416 stainless and solder/braze parts together. Pics above are a start, I have to make a small hole in first stage to allow oil to fill inner chamber on stage two. So these are in theory going to be very similar to the real deal multi stage hydraulic cylinders.
__________________
Always wasting money, as the wife says. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
|
|
#900
10-02-2015, 05:40 PM
|
|||
|
|||
|
Re: Great Dane excavating co.
Cooper your drawing of the cylinder shows a lower and an upper port why? If you are going for a telescoping cylinder you only need one port. As for your cylinders you don't need a hole on the stage bottom you just need the tube and the seals to keep the oil in the cylinders. Your picture shows a bleeder on the top stage and that is good but not really need for what you are going to do. You will need o rings to seal the stages and to be guides. Hope I have helped it has always been my intentions to build a multi stage cylinder but that is as far as I got. Ed
|
 |
| Currently Active Users Viewing This Thread: 18 (0 members and 18 guests) | |
|
|
Linear Mode
