Metso Lokotrack LT120, Jaw Crusher.

[Azonic]

Made a little more progress on the crusher. I got some parts for the feeder table, so welded that up and started to try out the motors I got for the feeder, it was kind of a shot in the dark becuse I had no idea how much power it would take and how much the table would weigh.
It turned out that the original weights on the motors were to small so I got some scrap brass and made the weights twice as big, that woke the vibration up pretty good.

So I think I found a nice vibration speed.

Also mounted the crusher to the chassis. Now im waitning on some parts before I can continiue on the conveyor and feeder.










Video.
https://youtu.be/xi7a81UN6yc

[JAMMER]

Hello Kalle very nice project that will need a heavy steel fly wheel to crush properly. Ed

[Azonic]

Originally Posted by JAMMER

Hello Kalle very nice project that will need a heavy steel fly wheel to crush properly. Ed

In the pics there is a quite large (120x25mm) flywheel in steel, I have already crushed Swedish granite rocks, very hard, will see how it does in the long run, but it does crush.

[JAMMER]

That is good to hear Kalle. Ed

[pontiacmann]

Very Nice Work