Vertical Ribbed Dump Trailer

[Northern Farmer]

Aircraft paint stripper is good stuff to, spray it on and watch the paint/crap bubble off after only a couple minutes. Stuff eats right through rubber gloves!
http://www.canadiantire.ca/en/automo...ontent=Default

Clutch cover I did on my old KTM quad




After many hours of buffing

[Supermario]

I was going to try and save you from yourself Brandon and suggest you leave the trailer as is but then I thought, that would cause Reg to have a heart attack when all that extra work he did just so it could be polished didn't happen so.... carry on my friend. I like ya but hey, we can't let anything bad happen to Reg .

Which reminds me, have you been eating right and exercising regularly Reg? How's the blood pressure? What's your mental state?..... wait! Don't answer that last one! Not in public anyway


And that folks is the most kick a** trailer you will ever see! I can spot Steves wheels from a mile away, in less than a second. They are second to none hands down.

[Northern Farmer]

Hahaha thanks Mario

Reg what size socket did you use to tighten those tiny bolts with ? I see there's two different size bolts both very small.

[RCP57]

The bolts are 2-56 and 0-80 thread but I'm not sure of the head sizes. I made my own socket drivers using socket head bolts.

[TRUCKMAKER]

You might try this place, I believe they have the tools.

http://www.scalehardware.com

[RCP57]

Looks like those guys only have metric although they sure have some small sizes! I get the SAE bolts from Micro Fasteners and I think this tool kit would do the trick. https://www.microfasteners.com/wrset...et-wrench.html

[Northern Farmer]

Thanks guys

[Mikem]

If you look up wiha premium tools they carry metric and sae socket tools . Also JIMorris and micro mart sells a set of 4 socket drivers which can be installed in a screw gun for more speed lol

[Northern Farmer]

Thanks Mike took note

[RCP57]

Any updates Brandon?

[Northern Farmer]

Sorry none yet just got done rebuilding my gas rampage MT 1/5. Going to start to disassembling the trailer this week

[Northern Farmer]

Let the fun begin!

[bigford]

oh boy!!!

[Northern Farmer]

Dammit just my luck none of these work on these tiny bolts

[RCP57]

Really? WTF are they for then?

[Northern Farmer]

Atleast I have some neat little wrenches...could come in handy one day working on something lol who know's.

[Northern Farmer]

I just emailed MF concerning the socket wrenches. Not sure they sent me the right one's...think these are metric ?

[RCP57]

I think they are metric. The link I posted before was for fractional sizes. You might get the bolts out using the head on one of the 3mm metric bolts. I think that's the same deal as the 0-80.

[Northern Farmer]

Haha boy do I feel like a dumbass!...didn't realize you used 3 different tiny bolt head sizes. So small hard to see a difference looking at them. Wrenches work on 2 bolt heads out of the 3. The tiniest one's you used for like the shovel brackets it doesn't fit. No biggie I'll take my time working around it.

[Northern Farmer]

#0 = 3/32" fits 0-80 bolts
#2 = 1/8"