How is eveyone running their radio joystick operations for an excavator?

[frizzen]

I'd like to know how you guys run cranes, draglines, and cable excavators. i'm assuming kinda close to SAE Excavator since we aren't running all the extra clutch levers and brakes.

I don't want to have to unlearn too many bad habits if i run another machine.

For now my plan was leaning toward:
Left stick
. . Left - Right = cab rotate / slew. push left = boom goes left
. . Up - Down = not used (need to convert from throttle style)

Right stick
. . Left - Right = crowd/drag. Push left = pull toward cab
. . Up - Down = hoist line. Not sure if i like 'pull up' or 'up is up'

3 pos Aux switch
. . Boom angle. Up is up