Skeeters contracting services

[skeeter]

Well,I hit a snag with this project. turns out the servo I selected to use for teh drive motors has a b@stard bolt that attached the servo horn to it. The bolt is 2.3mm. The LHS ONLY offers 2.5, & 3mm bolts. Needing a longer bolt, I had to do something. I opted to use a 3mm button head screw. This meant I had to drill out, & tap new threads into the servo.

Here's a few pics to show it fits together. Also HOPEFULLY, a video too. IDk for sure if the vid will show up. Flicker claims they can do video, but I've never seen anyone link one, nor have I tried to link one from there before. We'll find out if it works or not!

WELL..................I can't figure out how to get video to upload to flicker, so I'll try YouTube.

Here's a pic showing what I had to trim to get this piece to fit over the screw that holds the servo in place.
unnamed (14) by Anthony Kalnoski, on Flickr

unnamed (15) by Anthony Kalnoski, on Flickr

HOPEFULLY I can get the video to upload to YouTube, to show that the proof of concept works.