Custom build of a Kenworth C509 as autralian roadtrain

[gismow]

Hi...

The new plate is cut out, glued and a bit sanded. An additional styrene piece is glued behind the middle part so that it is more stable.

Now it must try completely to be able to finish the sanding and the cut out of the windows.

[gismow]

Hi...

2 little steps.

1. I want to use smaller seals for the side windows, but I need something to give them the possibility to hold the window.

Before





After

​

2. I wanted to fix the grill at the bonnet. It's planned to fix the grill from behind.

I drilled holes and threaded them.



After that small pieces if brass are solded into the outside of the holes and sanded until it's no longer seen.











Now the grill can be screwed to the bonnet.

​