|
|
|||||||
| Electronics tech Anything to do with the electronics in a model. Lights, Radio, ESC, Servo, Basic electrical. |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
12-03-2017, 07:00 PM
|
||||
|
||||
Re: Leds using a old servo board question
See if this helps
http://www.rctruckandconstruction.co...ad.php?t=12930 I'd run a resistor for each color at the servo board, then send low current out through your connectors to all the leds If you know stall rating of donor servo and current requirement for the leds we could give exact numbers, otherwise keep adding until you're happy or the board gets warm during use. If it gets warm back off a couple and Y another servo board to that channel, or use a bigger servo board.
__________________
What do ya mean "Cars are neither Trucks or Construction"? It's still scale, and i play fairly well with others, most of the time... 
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Hybrid Mode
