RC4WD Dozer, modifications, upgrades, settings.

[Yard Toad]

Benny, thanks for the tip on the overfill tube. I have not had issues with this yet but still good information on the fix.

I would be interested in the TX mixing, but currently the stock Flysky TX will only support one mix. Thinking about upgrading radio to support more mixes or running a Sabertooth once I burn up the ESC’s. Still not sure the way I will go with this yet. Would you mind posting the Tx mix screen shots? Would be helpful info for those of us that may upgrade to new Tx’s.

Are you running the Radiolink at9? If so how many mixes will it support?

[Mavv]

Don't need to do any fancy mixing with your radio with the sabertooth. I'm using the 2x60 one.

Basically one lead goes to throttle, and one lead goes to the stick you want to turn, which for me is rudder. I use one of these controllers on my snowcat and it just makes it so much easier to control. The ripper is now on two toggle switches.

I did ditch the stock radio and use my Futuba T10. One thing I would like to do is figure out how to mix the pump to turn on when I want to use the plow but I don't quite have it figured out yet.

[Northern Farmer]

Originally Posted by Mavv

Don't need to do any fancy mixing with your radio with the sabertooth. I'm using the 2x60 one.

Basically one lead goes to throttle, and one lead goes to the stick you want to turn, which for me is rudder. I use one of these controllers on my snowcat and it just makes it so much easier to control. The ripper is now on two toggle switches.

I did ditch the stock radio and use my Futuba T10. One thing I would like to do is figure out how to mix the pump to turn on when I want to use the plow but I don't quite have it figured out yet.

Check out these videos

https://youtu.be/oxGPnQMmqpI
https://youtu.be/LP3saFpPUgw

[Mavv]

Thanks for those links ill watch them