DrDiff's Tamiya Freightliner Cascadia Evolution Build

[DrDiff]

I have a 8 ch rx in my rig. C1 is steering Ch3 is throttle Ch2 and Ch4 are for auxiliary things such as lights and sound functions. I have the gear select servo on CH5 as it has 3 positions that match the positions of the switch on the tx. If I were to convert all light and sound function to switches the Beier unit only recognises on off switches or two position switches unlike the three position switches on my taranis. So because of this all Sound effects and lighting functions have to be on Ch2 and CH4

[trucker n]

Do u have speed control connected to the usm 2 so they can interact

[DrDiff]

Currently the ESC is attached to ch1, ch3, and ch2. The cable from the output1 of the ESC is going to Ch1 input on the sound module. The shifter servo is plugged into Ch5. Ch6 is plugged into the Ch3 port on the Sound Module and Ch7 is plugged into Ch4 port of the sound module.

Originally Posted by trucker n

Do u have speed control connected to the usm 2 so they can interact

[trucker n]

U have to enable digital mode with esc in sound teacher and drive teacher for esc then it will work together