Re: ADT build
Yeah, your chart is quite accurate for scale too, anywhere between 35 - 40 will be fine for rock or dry dirt. If you do load any wet, don't pack it down with the bucket & it should slide out. A good acetone wash & metal-etch primer, keep the box inside as slippery as possible.
From Claus' pic, notice the location of the dump cyls being low & outside of frame? I noticed the gap you have between tires & frame, dual long Actuonix actuators would give you the most lifting power in this location.
You didn't put an elevated tail in your box? yet?
__________________
Sharing knowledge is one thing that defies basic arithmetic logic --- the more you share, the more you get!
Joe
|
02-20-2018, 03:31 AM
Threaded Mode