Volvo A40F

[Zabco]

What slicer are you using? I don't think I've seen support structure like that before. Looks like it would be much easier and cleaner to remove. Great work as always.

[Hemi1966]

Originally Posted by Zabco

What slicer are you using? I don't think I've seen support structure like that before. Looks like it would be much easier and cleaner to remove. Great work as always.

I'm using Cura, and those are called tree support.

[Hemi1966]

Ready and supports removed

[Zabco]

Originally Posted by Hemi1966

I'm using Cura, and those are called tree support.

Thanks, I'm gonna have to look into that. Sure made a nice clean print for you.

[Hemi1966]

After some filling and sanding

[Hemi1966]

Still missing some decals and clear coat

[Griszaa]

Hi Hemi

3d print look greate i cant wait to see it all together

have a fev question

what engine U use to power volvo ( kv ... etc)
what gearbox u Use
could U show where u Fit a hydraulic valve and pump under the hood

Regards
Griszaa

[Hemi1966]

Originally Posted by Griszaa

Hi Hemi

3d print look greate i cant wait to see it all together

have a fev question

what engine U use to power volvo ( kv ... etc)
what gearbox u Use
could U show where u Fit a hydraulic valve and pump under the hood

Regards
Griszaa

The motor I'm using is the LPR Truck Puller 3
https://www.lrp.cc/en/product/truck-puller-3-12-v/



The gearbox is Veroma 3-speed
https://www.veroma-modellbau.com/e-s...ar-manual.html




There's a self made dropbox after the gearbox:






At the moment I have the pump and valves removed, but I found this picture to show where they are located.