Motors

[fhhhstix]

Nate you are probably right my 55's run at 12000 14000 and the 85's I dynoed ran around 4500 to 6500 but this all depends on the motor does it have any timing or bushings compared to bearings. I have never had a 65 to run on the dyno. I have some integy 55 and 85 turn and they tend to be slower than higher end motors like novak or OHP. Mainly the comparison was just to show that you would need a low kv motor.

Travis

[JAMMER]

Nathan is this Holmes Hobbies in the states? Ed