Liebherr LTM1800 scale 1/24

[kerst]

While waiting for the AL sheets to arrive I made the 235-ton hook block. I had very little (none!) information to help me and I had to somehow get some measurements from pictures. And now it’s finished I think it is not quite right. I might change the whole thing again.



I also made a first mock-up of the boom, just to try out if it works. I am using 0.032” Al sheet. I bend the lower part and the upper part separately and then glued the two together. It seems to work and it is quite strong.


Kerst

[texken]

Looking Good.
Did you say what Glue you used to glue AL.

TEXKEN

[kerst]

Originally Posted by texken

Looking Good.
Did you say what Glue you used to glue AL.

TEXKEN

just look at the picture in post #54, the bottles are standing in the back ground. It is really good stuff, very strong.

kerst

[kerst]

Originally Posted by kerst

just look at the picture in post #54, the bottles are standing in the back ground. It is really good stuff, very strong.

kerst

this is the eBay store: http://shop.ebay.com/polymerproducts...from=&_ipg=100

Kerst