I hate Tamiya three speeds

[oldboy]

I Have found that you can bypass the gear shift if you run MFUs'

Just lock the gearbox in which gear you want and the mfu will change speed in the different gear positions example,

in 1st on transmitter revs are low

in 2nd on transmitter revs are medium

in 3rd on transmitter revs are high

so now I am locking my gearboxes in second and lettin the mfu do the work
saves on servos and linkage adjustments also it stops the gearbox from neutralizing

so that removes the problem of lost gears

Oldboy

[TINY-TRUCKER]

I had the same probs with 1st gear would work, then 2 nd would work then 3rd would be just not there so then i just lock it in 1st or 2nd gear & leave it cause i would not be driving it to far so yer. it piss me off as well.

[ddc333]

http://www.stellamodels.net/catalog/...oducts_id=5071


might help gear changing ??

[SonoranWraith]

Originally Posted by ddc333

http://www.stellamodels.net/catalog/...oducts_id=5071


might help gear changing ??

Wow helical gears. Good thing they give you 3 pinions because tracking down replacement helical pinion would not be easy.

[ihbuilder]

I don't know about it helping gear changing since the gears do not slide .


IHSteve

[Juganought]

I wont even bother fitting second servo's to my rigs now. Gearbox is locked in first, fast enough for me

[sundance]

I have 28 trucks and never had a problem with the 3 speed.
take it apart and start over again.