55 turn still too fast!

[rc_farmer]

Originally Posted by fhhhstix

First off a smaller pinion such as a 6 tooth will help. I tried a 6 tooth and a 55 but it is still not as slow as a 4:1. Next if it is still to fast you can go to a 65 turn or a 75 turn with the smaller pinion. Are you planning to use an MFU or similar unit in this truck, if so I think you could still get by with an Integy 4:1 which would put the motor up over top of the servos with no modification.

Travis

True-that!

[Brian in PA]

Thanks Guys! Where would I find that integy unit at?

Brian

[ihbuilder]

brian I'd go with the integy box like travis stated ,thet're not expensive , but use a 55t or 65t unless you want it sllloooowwww like my 5900 which is 75t 3.9:1 integy w/stock pinion + tami 3 spd .