![]() |
|
Big Boys of the road 4x4/6x6/8x8/10x10 Trucks This forum is for those multiple axle trucks and other vehicles on and off road. |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]()
I was going to raise the gearbox. it started good .... but when the body was in place, then the gearbox was too high. redo, do it right! Now it starts to get complicated.
![]() angle of the drive shaft became very sharp!!!!! Last edited by krankillen; 11-13-2012 at 02:35 PM. |
#2
|
|||
|
|||
![]()
had to rout a new aluminum plate with a different angle. so I could lay down on the gearbox on the side.
![]() ![]() ![]() ![]() ![]() |
#3
|
|||
|
|||
![]()
I was going to use the original steering.
![]() servo is moved from the side, in front of the gearbox instead. Last edited by krankillen; 11-13-2012 at 02:53 PM. |
#4
|
|||
|
|||
![]()
is not so much images on the rear wheels. it will be rear-wheel steering. intend to use the original steering here. but had to remove it. I put a servo instead.
![]() ![]() |
#5
|
|||
|
|||
![]()
ordered a sound kit that would fit somewhere!!!
![]() |
#6
|
|||
|
|||
![]()
grind, grind, grind! a fifth wheel on the truck and a winch
![]() ![]() |
#7
|
|||
|
|||
![]()
Test assembly of body
![]() ![]() took away the color of the shock absorbers. ![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|