CAT 374D L

[Newcastle]

Hi. Great build. What kind of rpm are you looking from your motors after the reduction?

[tracksntreadslou]

Coming along Nicley Ari ..Your attention to detai is awsome ..Pretty much giving it your own signature with all the little changes ,extras and add ons ..When your milling out the smaller holes can you pretty much cut through the thinner guage material or do you have to make multi passes with those fine bits..Feed rates make a difference as well? Thanks Ari and Nice work

[Hemi1966]

Originally Posted by tracksntreadslou

When your milling out the smaller holes can you pretty much cut through the thinner guage material or do you have to make multi passes with those fine bits..Feed rates make a difference as well? Thanks Ari and Nice work

With those smaller bits I like to take several small passes with a higher feed rate.

Today I managed to make the upper cooler grill

[RCP57]

Looks fantastic Ari! It won't be long now!

[Hemi1966]

Originally Posted by RCP57

Looks fantastic Ari! It won't be long now!

Thanks Reg, I hoping to get the hydraulics up and running in few weeks, just missing filters and the tank.
I'm anxious to see how my cylinder will hold the pressure
To be honest there's still a lot to do, and it always seems to get harder and harder towards the end.

Here's the lower grill

[ihbuilder]

awesome job so far Ari . Question, did you order your internal gear online ? The site states they only except online payments from the UK . And of course , the 1's I need are not in stock .

[Hofabooz]

Hi

What a great model your attention to detail is amazing, thanks for sharing with us all, looking forwards to seen this progress.

Regards

Mark

[Hemi1966]

Originally Posted by ihbuilder

awesome job so far Ari . Question, did you order your internal gear online ? The site states they only except online payments from the UK . And of course , the 1's I need are not in stock .

Yes I did. They will send you a invoice to your email and you must pay that in advance.
It's simple to do in Europe when using those IBAN and BIC numbers but I don't know if are you able to use them when paying from outside EU.

[ihbuilder]

Originally Posted by Hemi1966

Yes I did. They will send you a invoice to your email and you must pay that in advance.
It's simple to do in Europe when using those IBAN and BIC numbers but I don't know if are you able to use them when paying from outside EU.

OK I'll try them again . worst case I cut them myself . I already have it programmed . It's just a good couple hours to cut in the mill in steel .

[rc entreprenøren]

This is the greatest build ever. This machine is going to awsome...

[Hemi1966]

Slow progress

[John T.]

WOW i am sooooooo jelious. such awsome work it just blows me away wow!!!!

[Hemi1966]

I got the hydraulic system up and running to test leaks and found one on the stick cylinder tubing I fix that and made a little video of the test run.
There's 7,2 kg weight on the bucket and it seems to have much more lifting capasity, all though it need lot of counter weight

http://youtu.be/M9QHtM6sdxI

[D8R]

will you manage counterweight made in alu or have to do in steel?
Good looking steps.
Guess by now that you are an expert on programing!
Dan

[Azonic]

Finally its moving!

Not to bad with only one leak, looks very smooth in the hydraulics!

[Lil Giants]

Just one leak?! ..that's pretty good on start up. The real test will be when you're working the snott out of it for a couple hours straight, maxing the pressure constantly!

[elliot330]

Originally Posted by ihbuilder

awesome job so far Ari . Question, did you order your internal gear online ? The site states they only except online payments from the UK . And of course , the 1's I need are not in stock .

if you need anyone in the UK to order stuff and forward it on, then let me know, don't mind helping fellow modellers out..

Elliot

[ihbuilder]

Originally Posted by elliot330

if you need anyone in the UK to order stuff and forward it on, then let me know, don't mind helping fellow modellers out..

Elliot

I'll keep that in mind Elliot thanks for the offer . I found a co. state side that has 1 in stock . Same price when converted .

great job so far Ari your truly an inspiration for me to get my but in gear and get 1 of mine done

[Hemi1966]

Originally Posted by D8R

will you manage counterweight made in alu or have to do in steel?
Dan

I propably must put led inside
I would have never believe that this thing can have so much power, I was just lifting a full size car tire with steel rim which propably weighs around 20kg and it didn't even struggle.

[Lil Giants]

That's a bit extreme, what do you have the pressure set to?