|
|
|||||||
| Highway Trucks and Trailers On road trucks and trailers single and twin axle trucks. |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
10-03-2010, 07:44 PM
|
||||
|
||||
Re: IH 9670 Trailer Toter
Ok so last night and today I got the pogo stick finished. I got the winch all set in the truck and I ran the cable threw break line to the back of the truck then up and over to a brass pulley. I ran it on a dead 6 cell pack and it has enuff power to lift the nose off the ground so it works real well I am trying to down load my video off my Black Berry but is not working to well..
 I also made a mount for the R2 tranny and mounted it and the steering servo so not some more details and so minor body work and it will be ready for paint I am trying to have it done for the club meet in a few weeks..Top view of the winch you can see the break line.  Under Side you can see the break line and the brass clamps i made to hold it in place.   The finished Derlin hitch and ball.  
__________________
Paul W. "Tamiya Cowboy" HI.. My name is Paul.. And.. I.. Have a Cabover Addiction. RIP FreddyGearDrive 2-12-59/12-19-11 "LET IT EAT" Like Us on Facebook "Corn Field Mafia" To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. 
|
|
#2
10-03-2010, 07:57 PM
|
||||
|
||||
Re: IH 9670 Trailer Toter
That is just sweet man...after seeing theses builds....time to go back to the kiddy pool...
 
__________________
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. One Bus Stop Short Of The Short Bus...
|
|
#3
10-03-2010, 08:27 PM
|
||||
|
||||
|
Re: IH 9670 Trailer Toter
Quote:
http://www.youtube.com/watch?v=vAwvEKoYBLg http://www.youtube.com/watch?v=wJABK8s1bXM
__________________
Paul W. "Tamiya Cowboy" HI.. My name is Paul.. And.. I.. Have a Cabover Addiction. RIP FreddyGearDrive 2-12-59/12-19-11 "LET IT EAT" Like Us on Facebook "Corn Field Mafia" To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
|
|
#4
10-03-2010, 09:21 PM
|
||||
|
||||
|
Re: IH 9670 Trailer Toter
Quote:
 Paul fantastic job keep up the good work. Travis
__________________
AKA "00" Biddle RIP FreddyGearDrive 2-12-59/12-19-11
|
|
#5
10-09-2010, 11:38 PM
|
||||
|
||||
|
Re: IH 9670 Trailer Toter
Thanks Much Travis!!
OK I have everything on this truck done all the plastic work is now done all I have left to do is body work and I have to modd another stack but I am waiting on one so hoping to have it done painted next weekend we shall see.. Flipped the ladder around so it did not stick out any further than the out side of the cab and you dont have the big old hunk of chrome mounted to the side of the cab..  All plastic trim done on the back of the bed..  Back wall in and all un needed holes glued shut and ready for body work also filled the blinker mount holes shut and I wil be lowering them to were they belong on a IH 9670.. 
__________________
Paul W. "Tamiya Cowboy" HI.. My name is Paul.. And.. I.. Have a Cabover Addiction. RIP FreddyGearDrive 2-12-59/12-19-11 "LET IT EAT" Like Us on Facebook "Corn Field Mafia" To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Hybrid Mode
