![]() |
|
Construction Equipment Tech Hydraulics, Electronics, General Engineering, ect in constr equip |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
![]()
You are right Ed, I got a reply from Frank, Vario's new triple bar tracks come from their own self made molds and it's a different pitch too.. he didn't say what the difference was.
If Kalle was specing from the old double bar tracks, then you'll need the old double sprocket you sourced from France.
__________________
Sharing knowledge is one thing that defies basic arithmetic logic --- the more you share, the more you get! Joe |
#2
|
|||
|
|||
![]()
OK here we go I went out in the garage an shaking from the cold 27 degrees no heat could not light my heater and got these measurements shaking and still shaking in the house. Old sprocket outside measurement .323 old chain inside measurement .340 new sprocket .609 outside measurement new chain .489 inside measurement both chain measurements are taken from the inside of the chain were the sprocket rider. Joe no I did not get the narrow sprockets from France I got both of them here in the states for $ 75 for the pair I believe if you remember I sent you an email about them. I hope this helps to answers a few questions. Ed
Last edited by JAMMER; 03-16-2013 at 07:53 AM. |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|