|
Mechanical tech This is for the mechanical parts of a model. Gear reductions, Axles, Transmissions, General drive line |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Re: simple device to build cheap and exactly leave springs
Sailbagger,
Nice work. One question can you show how you obtain the set in the spring. Set being the curve. Thank you Paul |
#2
|
||||
|
||||
Re: simple device to build cheap and exactly leave springs
Quote:
Hello Paul, i hope to translate it correct: While cutting the bronze with scissors, it curls. I turned the strpes manual in the correct Position, only little and fast work.
__________________
Best Regards Wolfgang To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
#3
|
|||
|
|||
Re: simple device to build cheap and exactly leave springs
I really like what you have done. What thickness of bronze are you using, and what material are you using to hold the springs together?
Rob |
#4
|
||||
|
||||
Re: simple device to build cheap and exactly leave springs
Quote:
Hello Rob, the thickness is 0,5mm. The parts for hold the springs together is in every windshield wiper under the rubber. Naturally i have used an old. The parts a pressed with aid of a vise.
__________________
Best Regards Wolfgang To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|