ryman
08-11-2012, 06:41 PM
Ok I did do a few more changes than just the stickers.:cool:
http://i1261.photobucket.com/albums/ii581/rymanphx/IMAG0096.jpg
I added half a tire rack from a reefer trailer to each tanker and a wheel guard from a pole trailer.
http://i1261.photobucket.com/albums/ii581/rymanphx/Tanker/tirerack.jpg
Then I thought it would be cool if the tanker could "Fuel up" the trucks so a added a charger to one of the tankers:rolleyes:
http://i1261.photobucket.com/albums/ii581/rymanphx/Tanker/charger6.jpg
http://i1261.photobucket.com/albums/ii581/rymanphx/Tanker/charger.jpg
I disassembled a charger, used the cover as a template to drill and cut the rear cover of the tank. The mount for the pc board is standoff out of a computer. I also had to desolder the board for the Lipo balance plugs and relocate that and the power connections to the metal project box I mounted on the side of the traler frame.
http://i1261.photobucket.com/albums/ii581/rymanphx/Tanker/charger2.jpg
http://i1261.photobucket.com/albums/ii581/rymanphx/Tanker/charger1.jpg
http://i1261.photobucket.com/albums/ii581/rymanphx/Tanker/charger5.jpg
The dolly is a modified pole trailer I added a fifth wheel.
http://i1261.photobucket.com/albums/ii581/rymanphx/Tanker/dolly2.jpg
http://i1261.photobucket.com/albums/ii581/rymanphx/Tanker/dolly1.jpg
This is the release for the fifth wheel
http://i1261.photobucket.com/albums/ii581/rymanphx/Tanker/dolly3.jpg
http://i1261.photobucket.com/albums/ii581/rymanphx/Tanker/dolly4.jpg
and a king pin to the rear bunk so I can still use it as a pole trailer
http://i1261.photobucket.com/albums/ii581/rymanphx/Tanker/dolly.jpg
Thank you
http://i1261.photobucket.com/albums/ii581/rymanphx/IMAG0096.jpg
I added half a tire rack from a reefer trailer to each tanker and a wheel guard from a pole trailer.
http://i1261.photobucket.com/albums/ii581/rymanphx/Tanker/tirerack.jpg
Then I thought it would be cool if the tanker could "Fuel up" the trucks so a added a charger to one of the tankers:rolleyes:
http://i1261.photobucket.com/albums/ii581/rymanphx/Tanker/charger6.jpg
http://i1261.photobucket.com/albums/ii581/rymanphx/Tanker/charger.jpg
I disassembled a charger, used the cover as a template to drill and cut the rear cover of the tank. The mount for the pc board is standoff out of a computer. I also had to desolder the board for the Lipo balance plugs and relocate that and the power connections to the metal project box I mounted on the side of the traler frame.
http://i1261.photobucket.com/albums/ii581/rymanphx/Tanker/charger2.jpg
http://i1261.photobucket.com/albums/ii581/rymanphx/Tanker/charger1.jpg
http://i1261.photobucket.com/albums/ii581/rymanphx/Tanker/charger5.jpg
The dolly is a modified pole trailer I added a fifth wheel.
http://i1261.photobucket.com/albums/ii581/rymanphx/Tanker/dolly2.jpg
http://i1261.photobucket.com/albums/ii581/rymanphx/Tanker/dolly1.jpg
This is the release for the fifth wheel
http://i1261.photobucket.com/albums/ii581/rymanphx/Tanker/dolly3.jpg
http://i1261.photobucket.com/albums/ii581/rymanphx/Tanker/dolly4.jpg
and a king pin to the rear bunk so I can still use it as a pole trailer
http://i1261.photobucket.com/albums/ii581/rymanphx/Tanker/dolly.jpg
Thank you