![]() |
|
|||||||
| Construction Equipment If it digs, pushes, hauls dirt "off road" post it here. |
![]() |
|
|
Thread Tools | Display Modes |
|
|
|
#1
|
|||
|
|||
|
From my experience with racing go karts where the tires have to reach an optimum operating tempature of 165* F, when I ran tires with air or nitrogen they both reacted the same as far as how much air pressure was increased and it also took the same amount of laps to build the same heat and air pressure!!! With all that being said, I would look into foam filling the tires to achieve what you want!!! Also my wife's new nissan cube dropped air pressure from the recommended pressure of 44 psi to an average of 20 psi when the cold weather set in, and they are nitrogen filled also!!! Hope this helps!!!
|
|
#2
|
||||
|
||||
|
Made a new cab today (cut from 14ga)....needed to make some changes...so I added holes to attach the windows and the grab bar at the same time. Decided to use fasteners to attach the windows....the upper portion of the cab will be painted black so the fasteners shouldn't stick out to bad....
![]() [IMG] [/IMG][IMG] [/IMG][IMG] [/IMG][IMG] [/IMG][IMG] [/IMG]
|
|
#3
|
||||
|
||||
|
Nice! So jealous!
Maybe you should get some button head screws???? Not picking, just a suggestion. |
|
#4
|
||||
|
||||
|
Thanks.....button heads would most likely look better....don't have any that small...yet...lol
|
![]() |
| Currently Active Users Viewing This Thread: 4 (0 members and 4 guests) | |
|
|