1/16 Bucyrus-Monighan Walking Dragline

[tracksntreadslou]

Wow steve your brass work looks awsome ,thing is looking huge too..I could just imagine being close to the 1 to 1 machine after seeing the size of a 1/16 thumbs up ...it gets better every day

[9W Monighan]

I had a question from another site on how I'm joining my parts.............

Originally Posted by ozcranedude

How are you joining the parts together soldier ,Tig ,Gas ,Bolts ,Rvets.

All of the above. I tig welded the ends of the steel beams where needed. Bolted with literally thousands of 0-80 bolts and up to 1/4-20 bolts on parts not seen. Riveted pieces together on the brass exterior with .040'' dia rivets. And I'll be soldering and bolting the brass boom sections.



Early stages of the ESCO bucket.


Bolting nightmare!


View of some of the fairlead structure rivets

[9W Monighan]

I finally got to solder one of the side pieces together. It was a little tricky till I got on to it.
Here's the last mock up before soldering....



View showing lamination's on the base


Center break


Hot out of the fixture. I still need to do some soldering on this side where the solder didn't flow thru.