2 IH 433 payscrapers (ps433-2 moves)

[JAMMER]

Hello Steve that pan is looking real good and so does that lowboy it setting on I need one. Ed

[ihbuilder]

Originally Posted by JAMMER

Hello Steve that pan is looking real good and so does that lowboy it setting on I need one. Ed

thanks Ed , I tried It out today with both motors running ( back to the shelf it went ) . hollow mammoth tires just aren't going to cut it just spins the wheels in the tires . So I'm going to get my dozer going , then revisit these later .


Ed I'm not ready yet to make lowboys yet

IHSteve

[JAMMER]

Steve can't you fill the tires with silicone or a hose that will help and give it a little weight to ? Ed

[ihbuilder]

Originally Posted by JAMMER

Steve can't you fill the tires with silicone or a hose that will help and give it a little weight to ? Ed

Ed , the weight or filling is not the issue , it's the wheels spinning in the tires . I found the tires I want on RC-machines just a mater of watching our $ inflate and becoming worthless next to the euro + lack of it also and I'm sick of trying to be low budget ( Impossible ) . So I don't care how long it takes , these are going to be the way I want them , If I got to make everything on them

IHSteve

[JAMMER]

Steve if you had a hose inside the tire and get some 3 M Scotch Weld it is an epoxy and will hold on the rubber and aluminum and the tires won't spin. Ed

[ihbuilder]

Ed , I've been toying with getting them filled at my tire guy like they do for skid steers . I just want to get my wheels made first , so it looks right then get them filled right up .