Volvo A40F

[CAT315C]

Hello Hemi1966


His works are really leaving us with dropped jaw, everything you do is a tremendous perfection.

This is a CNC milling machine?

Thank you,

Carlos

[9W Monighan]

Very fun doing these type of parts. Too bad you don't have a indexing head so you can rotate the part vertically or horizontally without disturbing the setup in the three jaw then turn it 0-90deg.
Here is an example. I don't have a vertical shot.

[Hemi1966]

Originally Posted by 9W Monighan

Very fun doing these type of parts. Too bad you don't have a indexing head so you can rotate the part vertically or horizontally without disturbing the setup in the three jaw then turn it 0-90deg.
Here is an example. I don't have a vertical shot.

I do have a indexing head, but I'm worried that as I must machine the back side of the part also, I have to clamp the part long way out of the chuck and it may not be very solid

[Hemi1966]

The rear hitch it about done