Faun Kraka/TOW 1:8 RC

[leo1a]

here's a picture from the original

[leo1a]

moin moin,
so here's some pictures of the almost finished 35 SEM (still grinding), but after the crap with the switches I have to now no more bock. AGAT is also finished and the listener, now I just have to make an external speaker and the mounting platform for the vehicle assembly.












moin moin,
heute habe ich mich mal dran gemacht das Mounting ( halterung ) für das SEM 35 ( SEM 25 ) als prototypen zu bauen. Das ganze erstmal provisorisch mit klebeband fixirt und verkabelt.















Moin moin,
ich habe mal eine komplette verkabelung für die Fahrzeugmontage zusammen gebaut.





Moin moin,
so since I also need the good old SEM25 for the radio-Kraka follow the first pictures here.






Moin moin,
so also the SEM 25 is now ready made. The switch I'm doing next week, for this week's circuit tinker with.










Moin moin,
I still have to wait for the new rear axles I continued with the installation kit radio a little.
Backpacks for both SEM 35 are finished, at the lockboxes were some Zurösen and the hinges for the lid to it.

[leo1a]

so since I since Wednesday again belong to the working population you continue everything a little long sammer.
Today I built the mirror for a good retrospect of the driver. Are Foldable, the long stiffte be reduced after painting.
something gone ahead again after a short break.
On an original image I had seen that was also a pannier for the parachute on Kraka. So I once tailored one. Now I must, therefore, still each make a backpack and a stuff sack, since there is a crew of 2 men.
The picture was also watching where the guys have fixed all her Gerödel, see ABC-bag.
Furthermore, I have cut the missile tubes, which are now being made ready next.







































Today I have only once built a small part, a flashlight.
Then I once photographed my England figure together with the backpack, now I have only one Olive missing uniform.