Great Dane excavating co.

[Cooper]

Hey joe, yes the drives are planetary gears, so some movement might happen but minimal (I think). I just hate when the machine rolls forward!! I like how I have the dozer set up to run pump at 30% until stick imput ramps up to 100%. I don't know what's better, that or having pump %100 with bypass like the excavator is set up with a 4th valve. I never timed it but using the same battery I know I can usually get close to an hour on the dozer and in the excavator I doesn't last as long. I would have thought different with dozer running two motors and pump vs one big pump on ex. I think the drive motors in dozer are pretty mild and the big motor in the excavator is amp hungry. Running 8400mah 3s battery.

The cylinder tube I use is 1/2 I'd and 3/4 od. I can easily lathe down od to suit whatever. Also the 1/8 wall allows me to drill bolt holes into cylinder without soldering another piece. Cylinder rod will be 5/16? I forget exact size something along that. Are those meinhart valves the premacon ones? If so that's what I have in dozer and have had no leaks, problems whatsoever.

I know some may wonder why I'm transforming a decent working machine this rout but my intentions when purchased in beginning of year were to use it as a template to make one or to revamp using most parts to make a heartier beefier momma earth cutter .